Samsung LED Monitor Manuel D’Utilisation
Memorizing Channels
Antenna
Menu
→
Channel
→
Antenna
Before your product can memorize the available channels, you must select your TV's signal source,
Air
(using an
antenna) or
Cable
. Select
Air
or
Cable
. After you have selected the signal source, go on to the
Auto Program
function.
✎
Selecting the signal source using the
Antenna
function also determines the signal source the product is tuned
to. For example, if you receive your TV signal over the air, and you select
Cable
, you will see only snow. You must
select
Air
to see a picture.
Auto Program
Menu
→
Channel
→
Auto Program
The
Auto Program
function memorizes all channels that are available over the air or through your cable system and adds
them to the
Channel
list.
To start the Auto Program, follow these steps:
1. Go to the
Auto Program
menu.
2. Select
Air
or
Cable
or both, and then select
Next
. A
c
mark appears in the check box.
✎
If you selected
Air
or
Cable
in the
Antenna
menu, your choice will already be selected.
3. If you selected the
Cable
, the cable system screen appears. Select the
Digital Cable System
.
✎
If you selected the
Air
only, the
Auto Program
starts.
4. Select the correct cable signal format -
STD
,
HRC
or
IRC
.
✎
Most cable systems use
STD
(Standard).
5. Repeat for
Analog Cable System
.
6. Select
Next
. The
Auto Program
starts.
✎
After all the available channels are stored, the
Auto Program
removes scrambled channels. When done,
the
Auto Program
menu then reappears. This process can take up to 30 minutes.
English - 48
English - 49
Basic Features for the TV