Samsung LED Monitor Manuel D’Utilisation

3-17

Using the product

Use this button to select a function.

If you press the [

] button when there is no OSD, the input signal (Analog/DVI or Analog/

HDMI) is switched. When the input signal is switched by pressing [

] button or the prod-

uct is turned on, a message displaying the selected input signal appears at the top left of the 
screen.

This function is not available for products with an Analog interface only.

 

Press [AUTO] button to adjust the screen settings automatically

This function is only available in Analog mode.

 

If the resolution settings are changed in the Display Properties, the AUTO adjustment func-
tion is performed.

Press this button to turn the product on or off

•

The buttons on the right of the product are touch-type buttons.

•

Touch the buttons lightly with your finger. 

 

This LED is turned on when the product works normally. 

For more information on the power-saving function, refer to the power saving function 
in More Information. When not using the product for a long time, unplugging the power 
cord is recommended to minimize power consumption.