Samsung Galaxy S4 Zoom Manuel D’Utilisation
72
Wi-Fi and Wi-Fi Direct
Settings
Wi-Fi Status Indicators
These Status Bar icons show your current Wi-Fi
connection status:
connection status:
Displays when Wi-Fi is connected, active,
and communicating with a Wireless Access
Point (WAP).
A Wi-Fi access point is available, but your
device is not connected to it. It may also
display if there is a communication issue
with the target Wireless Access Point
(WAP).
and communicating with a Wireless Access
Point (WAP).
A Wi-Fi access point is available, but your
device is not connected to it. It may also
display if there is a communication issue
with the target Wireless Access Point
(WAP).
Wi-Fi Settings
The Wi-Fi settings menu allows you to set up many
of your device’s advanced Wi-Fi services.
of your device’s advanced Wi-Fi services.
1. From a Home screen, tap
Apps >
Settings
> Connections tab.
2. Tap Wi-Fi, and then tap ON/OFF to turn Wi-Fi on.
3. Tap Smart network switch to automatically
switch between Wi-Fi and mobile networks to
maintain a stable Internet connection.
maintain a stable Internet connection.
4. Tap
Menu for options:
•
Advanced:
-
Network notification: Receive a notification
when new Wireless Access Points (WAPs)
are available.
when new Wireless Access Points (WAPs)
are available.
-
Sort by: Sort Wi-Fi networks by Alphabet or
Signal strength.
Signal strength.
-
Keep Wi-Fi on during sleep: Specify when
to disconnect from Wi-Fi.
to disconnect from Wi-Fi.
-
Always allow scanning: Allow Google
location service and other apps to scan for
networks, even when Wi-Fi is turned off.
location service and other apps to scan for
networks, even when Wi-Fi is turned off.
-
Auto connect: Automatically connect to
AT&T Wi-Fi networks, even when Wi-Fi is off.
AT&T Wi-Fi networks, even when Wi-Fi is off.
-
Install certificates: Install authentication
certificates.
certificates.
-
MAC address: View your device’s
MAC address, which is required when
connecting to some secured networks (not
configurable).
MAC address, which is required when
connecting to some secured networks (not
configurable).
-
IP address: View your device’s IP address
(not configurable).
(not configurable).
•
WPS push button: Set up a connection to a
WPS (Wi-Fi Protected Setup) router or other
equipment.
WPS (Wi-Fi Protected Setup) router or other
equipment.
•
WPS PIN entry: View the PIN used by your
device to set up a PIN-secured connection
to a Wi-Fi router or other equipment (not
configurable).
device to set up a PIN-secured connection
to a Wi-Fi router or other equipment (not
configurable).
•
Help: Learn about setting up and using Wi-Fi
networks, and other settings.
networks, and other settings.
Wi-Fi Direct
Wi-Fi Direct allows direct device-to-device
connections via Wi-Fi, without having to connect to a
Wi-Fi network.
connections via Wi-Fi, without having to connect to a
Wi-Fi network.
1. From a Home screen, tap
Apps >
Settings
> Connections tab.
2. Tap Wi-Fi, and then tap ON/OFF to turn Wi-Fi on.
Wi-Fi must be on to configure settings.
3. Tap Wi-Fi Direct. Your device automatically
scans for nearby Wi-Fi Direct devices, or you can
tap Scan to start scanning.
tap Scan to start scanning.
4. After scanning for devices, select a device,
and then follow the prompts to complete the
connection.
connection.
•
Tap Multi connect to scan for devices that
support multi connect. Select the devices
and follow the prompts to establish the
connections.
support multi connect. Select the devices
and follow the prompts to establish the
connections.
•
To rename your device (as seen by other
devices), tap
devices), tap
Menu > Rename device.
Wi-Fi Direct Status Indicator
Displays when connected to another
device using Wi-Fi Direct.
device using Wi-Fi Direct.