Samsung External Dispenser French Door With Showcase Door Manuel D’Utilisation

English - 11

SETTING

 UP

REMOVING THE REFRIGERATOR 
DOORS

For some installations you need to remove the 
fridge and freezer drawers so you can move the 
refrigerator to its final location.  
Do not remove the doors/drawer if you don’t need 
to.  
If you do not need to remove the refrigerator 
doors, go to Adjusting the Level on page 14.  
If you need to remove the doors. continue below. 
Before removing the door/drawer, make sure you 
read the following items:

Disconnect power to the refrigerator before 
removing the doors or drawers.

•  Be careful not to drop, damage, or 

scratch the doors/drawers while 
removing them.

•  Use care when you remove the doors/drawer. 

The doors are heavy and you could injure 
yourself.

•  Reattach the doors/drawer properly to avoid: 

 

- Moisture from air leakage.

 

- Uneven door alignment.

 

- Wasting energy due to improper door seal.

Disassembling the refrigerator doors

Be careful not to drop and scratch the doors while 
removing them.

With the door opened

1.  Remove 3 screws holding down the TOP 

TABLE ( 

1 ) and separate the connected wires.

(1)

2.  Disconnect two connectors ( 

2 ) on the left side  

door. To remove the water coupler from the 
hinge, twist and pull it from the hinge. 
Remove the water line ( 

3 ) while pressing the 

marked part ( 

4 ) of the water line coupler.

(2)

(3)

(4)

3.  Pull and remove the hinge lever ( 

5 ). Remove 

the ground screw ( 

6 ) attached to the upper 

left door hinges with a philips screwdriver (+). 
Remove the upper left and right door hinges 
( 

7 ).

(5)

(7)

(6)

DA68-03028A-06.indb   11

2015. 11. 5.   �� 8:09