Samsung External Dispenser French Door Manuel D’Utilisation

 

Operating

Operating your French Door 

Refrigerator

using the ice Dispenser

Place a glass underneath the ice dispenser and push gently against the dispenser 

lever with your glass.

Make sure the glass is in line with the dispenser to prevent the ice from bouncing out. 

Caution

•    When Cubed Ice is selected after using the Crushed Ice mode, a small amount of 

residual crushed ice might be produced.

Caution

Please wait 2 seconds before removing the glass under the dispenser to prevent spills.

If the Refrigerator door opens, the Dispenser does not work.

PUSH

Controlling the fridge temperature

The fridge temperature can be set between 46°F and 34°F to suit your particular needs. Press the fridge button 

repeatedly until the desired temperature is shown in the temperature display. The temperature will move 2°F degrees 

each push(38°F → 36°F → 34°F → 46°F → 44°F → 42°F → 40°F → 38°F). The temperature control process for 

the fridge works just like the freezer process. Press the fridge button to set your desired temperature. After a few 

seconds, the fridge will begin adjusting towards the newly set temperature. This will be reflected in the digital display.

-   The temperature of the freezer, fridge or Pantry Room may rise 

    when you open the doors too frequently, or if a large amount of 

    warm or hot food is placed inside.

-    This may cause the digital display to blink. Once the freezer and 

     fridge temperature return to their normal set temperatures, the 

    blinking will stop.

-   If the blinking continues, you may need to “reset” the refrigerator. 

    Try unplugging the appliance, wait for around 10 minutes and then 

    plug the power cord back in.

-   If there is an communication error between the Display and Main Controller, the Pantry Display light may blink. 

Once the normal set temperatures are reached, the blinking will stop.

   If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center.

using the Power Cool

For a quick fridge cool down, use the Power Cool function. Press and 

hold the Fridge/Hold 3 sec for Power Cool button for 3 seconds. 

Then, the power cool indicator will light and activate the power cool 

mode independent of fridge set temperature. If you select Power 

Cool, the inside temperature of the fridge will decrease for about two 

and a half hours or until 25°F is reached. Press and hold the button for 

3 seconds again to cancel the Power Cool mode. Then, the indicator 

will go out and the refrigerator will return to the set temperature again.

usinG tHE CoLD watER DisPEnsER

Press the ice type or  water button to select the type of you want

Select this if you want 

to turn ice maker off.