Samsung External Dispenser French Door With FlexZone Drawer Manuel D’Utilisation

operating

 

02

 OPERA

TING

The Fridge button serves two purposes:

 

- To set the Fridge to your desired 

temperature.

 

- To turn the Power Cool function on 

and off.

1)  To set the Fridge temperature
Press the Fridge button to set the 
refrigerator to the temperature you want. 
You can set the temperature between 
44 °F (7 °C) and 34 °F (1 °C).

2)  Power Cool function
Touch and hold this button for 3 seconds 
to decrease the time needed to cool 
products in the Refrigerator. It can be 
helpful if you need to quickly cool easily 
spoiled items or if the temperature in 
the fridge has warmed dramatically (For 
example, if the door was left open).

The Ice Off button serves two purposes:

 

- To turn the Ice maker on and off

 

- To turn the Child Lock Function on 

and off.

1)  Ice Off Function
If you don’t want to make more ice, press 
the Ice Off button.

2) Child Lock Function
Touch and hold this button for 3 seconds 
to lock the display, the Flex Zone panel, 
and the dispenser buttons so the buttons 
can not be used.
Replace the highlighted text with this text: 
When Child Lock is on, the refrigerator 
does not dispense ice, water, or sparkling 
water, even if the Dispenser Lever is 
pressed.
The Child Lock icon lights up to indicate 
you’ve activated the Child Lock function. 
Press 3 seconds to unlock.

Press the Cubed Ice or Crushed Ice 
button to select the type of ice you want 
dispensed.
Each time you press the button, the 
cubed and crushed ice modes alternate 
and the Cubed or Crushed ice icon lights 
up, indicating your selection.

(Cubed)  (Crushed)

If you don’t want to make more ice, touch 
the Ice Off button.
The icon will light up and the Ice-Maker 
stops making ice.

We recommend you stop ice 
making if the following occur:

 

- There is enough ice in the ice 

bucket.

 

- You want to save water and 

energy.

 

- Water is not being supplied to 

the refrigerator.

If the ice maker function is ON, and 
the water line is not connected, 
there will be a water valve noise 
from the back of the unit. If this 
occurs, press the Ice Off (Hold 
3sec for child lock) button for less 
than 3 seconds until the Ice Off 
Indicator (   ) illuminates.

To save electricity, the Panel Display turns off 
automatically under the following conditions: 
When no button has been pressed, when 
no doors are open, or when no Dispenser 
Lever has been pushed. However, the icon 
indicating your cubed or crushed ice selection, 
or sparkling water selection, will stay on.  
When you press a button, open a door, or 
push a Dispenser Lever, the Panel Display will 
turn on again. All function keys will  become 
operational after you remove your finger from 
the button you pressed.

Water filter usage
This icon lights up when you need 
to change the filter, usually after the 
refrigerator has dispensed about 
300 gallons of water (after about 
6 months). The icon will blink red for 
several seconds when you open or close 
the door.  
After you install the new water filter, reset 
the filter indicator by touching and holding 
the Hold 3sec for Filter Reset button for 
3 seconds.

 

- If water is not dispensing or 

dispensing slowly, you need to 
replace the water filter because 
the water filter is clogged.

 

- Some areas have large amounts 

of lime in their water, which 
causes the water filter to clog 
more quickly.

DA68-02897A-12.indb   17

2016. 3. 30.   �� 2:28