Samsung External Dispenser French Door Manuel D’Utilisation

OPERA

TING

English - 13

( 9 ) Ice Off If you don’t want to make more ice, 

touch the Ice Off button. 

The icon will light up and the Ice-Maker 

stops making ice.

We recommend you to stop ice 
making if the following occur:
-  There is enough ice in the ice bucket.
- You want to save water and energy.
-  Water is not being supplied to 

the refrigerator.

If the ice maker function is 

ON, and the water Line is not 

connected, there will be a water 

valve noise from the back of the 

unit. press the Ice Off (Hold 3sec 

for child lock) button for less 

than 3 seconds until the Ice Off 

Indicator ( 

 ) illuminates.

The function key will operate after you remove 
your finger from the letters except E.Saver, Ice 
and Water key.

This icon will light up when you need to 

change the filter. After you use about 

300 gallons of water, the filter indicator 

lights up. (about 6 months). The icon will 

blink red for several seconds when you 

open or close the door.  

After you install the new water filter, reset 

the filter indicator by touching the Alarm/

hold 3 sec for Filter Reset button. 

•  If water is not dispensing or 

dispensing slowly, you need to 
replace the water filter because 
the water filter is clogged.

•  Some areas have large amounts 

of lime in their water, which 

causes the water filter to clog 

more quickly.

CHANGING THE WATER FILTER

To reduce risk of water damage to your 
property DO NOT use generic brands 
of water filters in your SAMSUNG 
Refrigerator.

USE ONLY SAMSUNG BRAND WATER FILTERS. 
SAMSUNG will not be legally responsible for any 
damage, including, but not limited to property 
damage caused by water leakage from the use 
of a generic water filter. SAMSUNG Refrigerators 
are designed to work ONLY WITH 
SAMSUNG Water Filter.
The Filter light turns red to let you know 
when it is time to change your water 
filter cartridge.

To give you time to get a new filter, the red light 
comes on just before the capacity of the current 
filter runs out. Changing the filter on time provides 
you with the freshest, cleanest water from your 
refrigerator.

1.    Shut off the water supply. Then, turn the water 

filter ( 

1 ) about 1/4 turn, counter-clockwise.

2.   Pull the water filter ( 1 ) from the case filter ( 2 ).

•  To change the water filter more easily, 

shut off the water supply valve.

•   Sometimes, it is hard to disassemble the water 

filter because impurities in the water cause it 
to stick. If you are having difficulties, grip the 
water filter firmly and pull it hard.

•   When you pull the 

water filter, a little 
water can leak from 
the opening. This is 
normal. To minimize 
the water leaks, keep 
the filter cartridge horizontal when you pull it.

•  To prevent overflow, empty the water filter tray       

( 

3 ) and dry around the filter case ( 2 ).

3.   Insert the new filter into the filter case ( 4 ).

4.  Push the filter, and then turn it clockwise until it 

locks.

•   If you have trouble inserting the water 

filter because of high water pressure, 
shut off the water supply valve.

•  The locked symbol should be lined up 

with the indicator line.

WARNING

2

1

3

2

4

(Red)

DA68-02603A-10.indb   13

2015. 11. 5.   �� 5:02