Samsung 4-Door Flex RF22K9381S Series Manuel D’Utilisation

English  33 

Installation

4.  Flush 1 gallon of water through the filter before drinking or using the water from 

the refrigerator. (Flush approximately 6 minutes.) To flush, press a large glass or cup 
against the water dispenser lever. Fill the glass, empty it, and then repeat.

5.  After you turn on the refrigerator, let the ice maker make ice for 1 to 2 days. Over that 

period of time, throw out the first 1 or 2 buckets of ice the ice maker makes to ensure 
all impurities have been removed from the water line.

NOTE

Only connect the water line to a potable water source.
•  If you have to repair or disassemble the water line, cut off 

1

/

4

“ of the plastic tubing to 

make sure you get a snug, leak-free connection.

•  You can test the water line quickly using a paper cup. Under normal conditions, the 

water dispenser can fill a 5 3/4 oz. (170 cc) cup in about 10 seconds.

STEP 6 Initial settings

After you complete the following steps, the refrigerator should be fully functional.
1.  Plug the power cord into the wall socket to turn the refrigerator on.
2.  Open the door, and check if the interior light lights up.
3.  Set the temperature to the coldest setting, and then wait for about an hour. Then, the 

freezer will be slightly chilled, and the motor should be running smoothly.

4.  Wait until the refrigerator reaches the set temperature. Now the refrigerator is ready 

to use.

STEP 7 Final check

When installation is complete, confirm that:
•  The refrigerator is plugged into an electrical outlet and grounded properly.
•  The refrigerator is installed on a flat, level surface with appropriate clearance between 

it and any walls or cabinets.

•  The refrigerator is level and is sitting firmly on the floor.
•  The door opens and closes freely, and the interior light turns on automatically when 

you open the door.

Untitled-8   33

2016-03-30     1:29:18