Samsung 4-Door Flex RF22K9381S Series Manuel D’Utilisation

English

54 

Maintenance

Handle and care

Icemaker bucket

If you do not dispense ice for an extended period, ice may form clumps inside the bucket. 
If this happens, remove and empty the icemaker bucket.

1.  To remove the ice maker bucket, gently 

lift it up, and then pull it out slowly 
while holding the bottom of the bucket 
with one hand and the side with the 
other hand.

2.  Lift up and pull the bucket out. Empty 

the bucket.

3.  When done, put the bucket back into 

position. If the bucket does not fit in, 
turn the helix screw 90 degrees, and 
then try again.

CAUTION

•  Do not apply excessive force to the bucket cover. The cover may break.
•  Do not forcefully close the door. Water may spill over the ice maker.
•  To prevent injury, make sure to clean up any ice or water that has fallen on the floor.
•  To prevent accidents or injury, do not let children play with the water dispenser or the 

ice maker.

•  Do not put your hand or an object into the ice chute. This may cause physical injury or 

product damage.

•  Use only the provided ice bucket. Third-party ice buckets may cause a system failure.
•  Use only potable water that is connected to the water supply line.

NOTE

•  The water pressure required for ice making is between 20 psi and 125 psi.
•  If the Ice Off indicator blinks, remove and reinsert the ice bucket. Make sure it is 

reinserted properly.

•  Noise from the the ice maker as it produces ice during the ice making process  is 

normal.

•  While the door is open, neither the ice maker nor the water dispenser operates.

Maintenance

Untitled-8   54

2016-03-30     1:29:23