Samsung SCX-6345N Manuel D’Utilisation
5.3
<Copying>
Reducing or enlarging copies
Press the Basic tab > Reduce/Enlarge, then use left/right arrows to
reduce or enlarge an image on the paper.
reduce or enlarge an image on the paper.
Press more to see the values.
• Original(100%): Prints texts or images the same size as originals.
• Auto Fit: Reduces or enlarges the original based on the size of the
• Auto Fit: Reduces or enlarges the original based on the size of the
output paper.
• Other preset values: Allows you to easily select commonly used
values.
Note
The Custom option is different depending on where the
originals is placed. In the DADF, 25~200% adjustment is
possible. And in the scanner glass, 25~400% adjustment is
possible.
originals is placed. In the DADF, 25~200% adjustment is
possible. And in the scanner glass, 25~400% adjustment is
possible.
Copying on both sides of originals (Duplex)
Press the Basic tab > Duplex, then use left/right arrows to select Duplex
value.
value.
Press more to see the detail values.
• 1 -> 1 Sided: Scans one side of an original and prints on one side
of the paper, this function produces exactly the same print out from
originals.
originals.
• 1 -> 2 Sided: Scans one side of originals and prints them on both
sides of the paper.
• 1 -> 2 Sided, Rotate Side 2: Scans one side of the originals and
prints on both sides of the paper, but the information on the back
side of the print out is rotated 180°.
side of the print out is rotated 180°.
• 2 -> 1 Sided: Scans both sides of the originals and prints each of
one on a separate sheet.
• 2 -> 2 Sided: Scans both sides of the original and prints on both
sides of the paper. This function produces exactly the same print
out from the originals.
out from the originals.
• 2 -> 1 Sided, Rotate Side 2: Scans both sides of the original and
prints each one on a separate sheet, but the information on the
back side of the printout is rotated 180°.
back side of the printout is rotated 180°.
Deciding the form of copy output (Collated /
Staple)
Staple)
Press the Basic tab > Output, then use left/right arrows to select Collated
or Stapled. This feature is supported only when the original is on the
DADF.
or Stapled. This feature is supported only when the original is on the
DADF.
Press more to see the values.
• Collated: Prints output in sets to match the sequence of originals.
• Uncollated: Prints output sorted into stacks of individual pages.
• Staple, Portrait: Adds a single staple to all of your portrait-
oriented output.