Samsung 3D Wi-Fi Built-in Blu-Ray Player BD-H5900 Manuel D’Utilisation

Network Settings

To begin setting up the network connection

for your player, follow these steps:
1. In the Home menu, press the ▲▼◄►

buttons to select Settings, and then

press the v button.

2. Press the ▲▼ buttons to select Network,

and then press the v button.

3. Press the ▲▼ buttons to select Network

Settings, and then press the v button.

4. Press the ▲▼ buttons to select Network

Type, and then press the v button.

5. Press the ▲▼ buttons to select Wired or

Wireless, and then press the v button.

6. Go to the next section.

Configuring Your Network

Connection

Before you begin, contact your ISP to find out

if your IP address is static or dynamic. If it is

dynamic, and you have a wired or wireless

network, we recommend using the Automatic

configuration procedures described below.

If you are connecting to a wired network,

connect the player to your router using a

LAN cable before you start the configuration

procedure.

If you are connecting to a wireless network,

disconnect any wired network connection

before you begin.

To begin configuring your network connection,

follow these steps:

Wired Network

Wired - Automatic

1. In the Home screen, select Settings, and

then press the v button.

2. Select Network, and then press the v

button.

3. Select Network Settings, and then press

the v button.

4. Select Wired in the Network Settings

screen, and then press the v button.

5. Select Connect button, and then press

the v button. The product detects the

wired connection, verifies the network

connection and then connects to the

network.

Wired - Manual

If you have a static IP address or the

Automatic procedure does not work, you'll

need to set the Network Settings values

manually.

Follow Steps 1 and 2 in Wired - Automatic,

and then follow these steps:
1. Select Network Status. The player

searches for a network, and then displays

the connection failed message.

2. On the bottom of the screen, select IP

Settings, and then press the v button.

The IP Settings screen appears.

3. Select the IP Setting field, and then press

the v button.

4. Select Enter manually in the IP Setting

field, and then press the v button.

5. Select a value to enter (IP Address, for

example), and then press the v button.

Use the number keypad on your remote

control to enter the numbers for the value.

Use the ◄► buttons on the remote

control to move from entry field to entry

field within a value. When done with one

value, press the v button.

6. Press the ▲ or ▼ button to move to

another value, and then enter the numbers

for that value following the instructions in

Step 5.

7. Repeat Steps 5 and 6 until you have filled

in all values.

✎

NOTES

` You can get the Network values from your

Internet provider.

8. When finished entering all the values, and

then press the RETURN or EXIT buttons.

The player verifies the network connection

and then connects to the network.

Wireless Network

You can setup a wireless network connection

in four ways:

- Wireless Automatic

- Wireless Manual

- WPS(PBC)

- WPS(PIN)

When you configure the wireless network

connection, any wireless network devices

currently connected through the player

or, if applicable, the player's current wired

connection, will be disconnected.

Wireless - Automatic

1. In the Home screen, select Settings, and

then press the v button.

2. Select Network, and then press the v

button.

3. Select Network Settings, and then press

the v button.

4. Select Wireless in the Network Settings

screen, and then press the v button.

The player searches for and then displays

a list of the available networks.

Move " Select '

Return

Network Settings

Select your network type.
Network type Wireless
Wireless network

Add Network

You can connect your Blu-ray

player to the internet. Please

select which wireless network

to use.

WPS(PBC) Search

5. Select the desired network, and then

press the v button.

6. On the Security screen, enter your

network's Security Code or Pass Phrase.

Enter numbers directly using the number

buttons on your remote control. Enter

letters by selecting a letter with an arrow

button, and then pressing v button.

7. When done, select Done and then press

the v button. The player verifies the

network connection and then connects to

the network.

8. When verification is complete, select OK,

and then press the v button.

✎

NOTES

` You should be able to find the Security Code or

Pass Phrase on one of the set up screens you

used to set up your router or modem.