Samsung Curved Blu-ray Disc Player J5500 Manuel D’Utilisation
Network Settings
Please contact your ISP to find out if
your IP address is static or dynamic.
If it is dynamic - and most are - we
recommend using the Auto procedure
for network setup. This is easiest and
will work in the majority of cases. If it is
static, you must use the manual set up
procedure.
Network setup directions start below.
✎
NOTES
`
This unit can only be connected to a Network
via a wired connection.
Wired Network Settings
1. In the Home menu, press the ▲▼
◄► buttons to select Settings,
and then press the v button.
2. Press the ▲▼ buttons to select
Network, and then press the v
button.
3. Press the ▲▼ buttons to select
Wired Network Settings, and
then press the v button. The
Wired Network Settings screen
appears.
Picture
Sound
Sound
Network
System
Language
Security
General
Support
Language
Security
General
Support
Settings
Wired Network Settings
Internet Protocol Setup : Auto
\
IP Address
: 0
0
0
0
Subnet Mask
: 0
0
0
0
Gateway
: 0
0
0
0
DNS
: Auto
DNS Server
:
0
0
0
0
>
Move " Select ' Return
4. In the Internet Protocol Setup
field, select Auto if it is not
selected. (Press v select Auto,
and then press v.)
5. The Auto Function acquires and
fills in the values for IP Address,
Subnet Mask, etc., automatically.
✎
NOTES
`
This process can take up to five minutes.
6. After the Network Function has
acquired the network values,
press the RETURN button.
7. Select Network Test, and then
press v to ensure the player
has connected to your network.
8. When the Network Test is
complete, press the RETURN
twice to return to the Main Menu.
9. If the Network Function does not
acquire the network values, go to
the directions for Manual Setup.
Manual Network Setup
Before you start manual network setup,
you need the network setting values.
To enter the Network Settings into your
player, follow these steps:
1. In the Home menu, press the ▲▼
◄► buttons to select Settings,
and then press the v button.
2. Press the ▲▼ buttons to select
Network, and then press the v
button.
3. Press the ▲▼ buttons to select
Wired Network Settings, and
then press the v button. The
Wired Network Settings screen
appears.
4. Select the Internet Protocol Setup
field, and then press the v
button.
5. Press the ▲▼ buttons to select
Manual, and then press the v
button.
6. Press the ▼ button to go to the
first entry field (IP Address).
7. Use the number buttons on your
remote to enter numbers.
8. When done with each field, use
the ► button to move to the next
field. You can also use the other
arrow buttons to move up, down,
and back.
9. Enter the IP Address, Subnet
Mask, and Gateway values in
the same way.
10. Press the ▼ button to go to DNS.
11. Press the ▼ button to go to the
11. Press the ▼ button to go to the
first DNS entry field.
12. Enter the numbers as above.
13. Press the RETURN button on
13. Press the RETURN button on
your remote.
14. Run a Network Test to ensure
the player has connected to your
network.
Network Test
Use this menu item to check whether
your network connection is working or
not.
Network Status
Use to check whether a connection to
a network and the Internet has been
established.
Device Name
Device Name function allows you to
change player's name by selecting
from device name list.
BD-Live Internet Connection
Set to allow or prohibit an Internet
connection when you use the BD-LIVE
service.
• Allow (All) : The Internet connection
is allowed for all BD-LIVE contents.
• Allow (Valid Only) : The Internet
connection is allowed only for BD-
LIVE contents containing a valid
certificate.
• Prohibit : No Internet connection is
allowed for any BD-LIVE content.
13