Samsung Curved Blu-ray Disc Player J5500 Manuel D’Utilisation

7. When done, press the TOOLS

button and then select the Copy

to USB using the ▲▼ buttons.

and then press the v button. The

Copy to USB pop-up appears.

8. Use the ▲▼ buttons to select the

device to store the copied files, and

then press the v button.

✎

NOTES

Do not disconnect the device while copying is

in progress.

9. If you want to cancel copying,

press the v button and then

select Yes. Select No to continue

copying.

10. When copying is complete, the

"Copying completed." message

appears. Press the v button to

go back to the Playback screen.

✎

NOTES

This function may not be supported by some

discs.

On the Copying screen, you can also choose

Select All and Deselect All.

Use Select All to select all item. This
cancels your individual item selections.

Use Deselect all to deselect all selected
item at once.

Playing Photo Contents

You can control the playback of photo

content located on a Blu-ray disc, DVD,

CD, USB device, or your computer.

Using the Tools Menu

During playback, press the TOOLS

button.

Start Slide Show/

Stop Slide Show

Select to start or stop the

slide show.

Slide Show Speed

Select to set a slide show's

speed.

Background

Music

Select to listen to music while

viewing a slide show.

Zoom

Select to enlarge the current

picture. (Enlarge up to 4

times)

Rotate

Select to rotate the picture.

(This will rotate the picture

either clockwise or counter

clockwise.)

Information

Shows the picture

information.

✎

NOTES

Depending on the disc or storage device, the

Tools menu may differ.

To enable the background music function, the

photo file must be in the same storage media

as the music file.

However, the sound quality can be affected

by the bit rate of the MP3 file, the size of the

photo, and the encoding method.

You can't enlarge the subtitle and PG graphic

in the full screen mode.

Appendix

Troubleshooting

Before requesting service, please try the following solutions.

PROBLEM

SOLUTION

No operation can be performed

with the remote control.

• Check the batteries in the remote control. They may need replacing.

• Operate the remote control at a distance of no more than 6.1m from

the player.

• Remove batteries and hold down one or more buttons for several

minutes to drain the microprocessor inside the remote control to

reset it. Reinstall batteries and try to operate the remote control

again.

Disc does not play.

• Ensure that the disc is installed with the label side facing up.

• Check the region number of the Blu-ray Disc/DVD.

Disc Menu does not appear.

• Ensure that the disc has disc menus.

The prohibition message appears

on the screen.

• This message appears when an invalid button is pressed.

• The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g.,

angles).

• You’ve requested a title or chapter number or search time that is out

of range.

Play mode differs from the Setup

Menu selection.

• Some of the functions selected in the Setup Menu may not work

properly if the disc is not encoded with the corresponding function.

The screen ratio cannot be

changed.

• The Screen Ratio is fixed on your Blu-ray Disc/DVD.

• This is not a problem with the player.

No audio.

• Make sure you have selected the correct Digital Output in the Audio

Options Menu.

The screen is blank.

• If the HDMI output is set to a resolution your TV cannot support (for

example, 1080p), you may not see a picture on your TV.

• Press the ^ button (on front panel) for more than 5 seconds with no

disc inside. All settings will revert to the factory settings.

• When the factory default settings are restored, all stored user BD

data is deleted.