Samsung RF263BEAESP Manuel D’Utilisation

Page de 80
operating
 
_15
02 OPERA
TING
Operating your French Door 
Refrigerator
USING THE CONTROL PANEL
( 1 ) Energy 
Saver
Hold 3 sec for 
°C↔°F
Touching this button turns Energy Saver 
mode on and off. When you turn Energy 
Saver on, the Energy Saver icon lights.
Turn Energy Saver off and the icon 
goes off. The Energy Saver function 
automatically turns on when power is 
supplied to the refrigerator.
If condensation or water drops appear 
on the doors, turn the Energy Saver 
mode off.
Touch and hold this button for 3 
seconds to switch the temperature units 
between °C and °F.
 
( 2 ) Freezer
(Hold 3 sec 
for Power 
Freeze)
Touch this button to set the freezer to 
your desired temperature.
You can set the temperature between 
-8 °F and 5 °F (between -23 °C and 
-15 °C). Touch and hold this button for 
3 seconds to decrease the time needed 
to freeze products in the Freezer. It can 
be helpful if you need to quickly freeze 
easily spoiled items or if the temperature 
in the freezer has warmed dramatically 
(For example, if the door was left open).
( 3 ) Ice 
Type/Water
Hold 3 sec for 
Filter Reset
Touch this button to select the ice or 
water function. You can select water or 
the types of ice(cubed/crushed ice).
Each time you press the button, the 
cubed and crushed
ice modes alternate and the Cubed or 
Crushed ice icon lights up, indicating 
your selection.
After you replace the water fi lter, touch
and hold this button for 3 seconds to
reset the water fi lter life indicator.
( 4 ) Alarm
Hold 3 sec for 
Lighting
To turn the door open alarm on and off 
If the door alarm is set to On, an alarm 
beeps if any refrigerator door is left open 
for more than three minutes.
The beeping stops when you close the 
door. The door alarm function is preset 
to On in the factory. You can turn it 
off by touching and then releasing this 
button. You can turn it back on in the 
same fashion. The icon lights up when 
the function is on.
If you touch and hold the Alarm/Lighting 
button for 3 seconds, the dispenser LED 
Lamp will stay on.
 
( 5 ) Fridge 
Hold 3 sec for 
Power Cool
Touch this button to set the fridge to 
your desired temperature. You can set 
the temperature between 34 °F and 
44 °F (between 7 °C and 1 °C). Touch 
and hold this button for 3 seconds 
to decrease the time needed to cool 
products in the Refrigerator. It can be 
helpful if you need to quickly cool easily 
spoiled items or if the temperature in 
the fridge has warmed dramatically (For 
example, if the door was left open).
( 6 ) Ice Off
Hold 3 sec for 
Child Lock
If you don’t want to make more ice, 
touch the Ice Off button.
Touching this button for 3 seconds turns 
on Child Lock which locks the display 
panel and dispenser buttons so the 
buttons can not be used. The Child Lock 
icon lights up to indicate you’ve activated 
the Child Lock function. Press 3 seconds 
to unlock.
( 7 ) Ice Off
If you don’t want to make more ice, 
touch the Ice Off button. 
The icon will light up and the Ice-Maker 
stops making ice.
We recommend you to stop ice 
making if the following occur:
-  There is enough ice in the ice bucket.
- You want to save water and energy.
-  Water is not being supplied to 
the refrigerator.
If the ice maker function is 
ON, and the water Line is not 
connected, there will be a water 
valve noise from the back of the 
unit, press the Ice Off (Hold 3sec 
for child lock) button for less 
than 3 seconds until the Ice Off 
Indicator (
) illuminates.
(RF263T**)
(RF263B/N**)
8
7
1
2
3
5
6
4
DA68-02615D(0.0).indb   15
DA68-02615D(0.0).indb   15
2012.7.11   8:16:30 PM
2012.7.11   8:16:30 PM