Samsung RF260BEAESP Manuel D’Utilisation
Safety information
_03
Never start up an appliance showing any signs
-
of damage. If in doubt, consult your dealer.
The room where the refrigerator will be sited
must be 1 m³ in size for every 8 g of R600a
refrigerant inside the appliance. The amount of
refrigerant in your particular appliance is shown
on the identifi cation plate inside the appliance.
If the appliance contains isobutane refrigerant
The room where the refrigerator will be sited
must be 1 m³ in size for every 8 g of R600a
refrigerant inside the appliance. The amount of
refrigerant in your particular appliance is shown
on the identifi cation plate inside the appliance.
If the appliance contains isobutane refrigerant
-
(R600a), a natural gas with high environmental
compatibility that is, however, also combustible.
When transporting and installing the appliance,
care should be taken to ensure that no parts of
the refrigerating circuit are damaged.
compatibility that is, however, also combustible.
When transporting and installing the appliance,
care should be taken to ensure that no parts of
the refrigerating circuit are damaged.
SEVERE WARNING SIGNS
FOR INSTALLATION
FOR INSTALLATION
• Do not install the refrigerator in a damp
place or place where it may come in
contact with water.
contact with water.
Deteriorated insulation of electrical parts may
-
cause an electric shock or fi re.
Do not place this refrigerator in direct sunlight
Do not place this refrigerator in direct sunlight
•
or expose to the heat from stoves, room
heaters or other appliances.
Do not plug several appliances into the same
heaters or other appliances.
Do not plug several appliances into the same
•
multiple power board.
The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matched the rating plate.
This provides the best performance and
The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matched the rating plate.
This provides the best performance and
-
also prevents overloading house wiring
circuits, which could cause a fi re hazard from
overheated wires. If the wall socket is loose,
do not insert the power plug.
There is a risk of electric shock or fi re.
circuits, which could cause a fi re hazard from
overheated wires. If the wall socket is loose,
do not insert the power plug.
There is a risk of electric shock or fi re.
-
Do not use a cord that shows cracks or
•
abrasion damage along its length or at either
end.
Do not bend the power cord excessively or
end.
Do not bend the power cord excessively or
•
place heavy articles on it.
Do not use aerosols near the refrigerator.
Do not use aerosols near the refrigerator.
•
Aerosols used near the refrigerator may cause
-
an explosion or fi re.
Do not install this appliance in a location where
Do not install this appliance in a location where
•
gas may leak.
This may result in an electric shock or fi re.
This may result in an electric shock or fi re.
-
Plug the power plug into the wall socket fi rmly.
•
Do not use a damaged power plug, damaged
power cord or loose wall socket.
This may result in an electric shock or fi re.
power cord or loose wall socket.
This may result in an electric shock or fi re.
-
This appliance must be properly grounded.
•
WARNING
Do not ground the appliance to a gas pipe,
plastic water pipe, or telephone line.
You must ground the refrigerator to prevent
plastic water pipe, or telephone line.
You must ground the refrigerator to prevent
-
any power leakages or electric shocks caused
by current leakage from the refrigerator.
This may result in an electric shock, fi re,
by current leakage from the refrigerator.
This may result in an electric shock, fi re,
-
explosion, or problems with the product.
Never plug the power cord into a socket that is
Never plug the power cord into a socket that is
-
not grounded correctly and make sure that it is
in accordance with local and national codes.
Do not pull or excessively bend the power cord.
in accordance with local and national codes.
Do not pull or excessively bend the power cord.
•
Do not twist or tie the power cord.
•
Do not hook the power cord over a metal
•
object, place a heavy object on the power
cord, insert the power cord between objects,
or push the power cord into the space behind
the appliance.
When moving the refrigerator, be careful not to
cord, insert the power cord between objects,
or push the power cord into the space behind
the appliance.
When moving the refrigerator, be careful not to
-
roll over or damage the power cord.
This may result in an electric shock or fi re.
This may result in an electric shock or fi re.
-
This appliance should be positioned in such a
•
way that it is accessible to the power plug.
Failing to do so may result in an electric shock
Failing to do so may result in an electric shock
-
or fi re due to electric leakage.
Do not install this appliance near a heater,
Do not install this appliance near a heater,
•
infl ammable material.
Do not install this appliance in a humid, oily or
Do not install this appliance in a humid, oily or
•
dusty location, in a location exposed to direct
sunlight and water (rain drops).
sunlight and water (rain drops).
• The installation or any service of this
appliance is recommended by a
qualifi ed technician or service company.
qualifi ed technician or service company.
Failing to do so may result in an electric shock,
-
fi re, explosion, problems with the product, or
injury.
Do not stand on top of the appliance or place
injury.
Do not stand on top of the appliance or place
•
objects (such as laundry, lighted candles,
lighted cigarettes, dishes, chemicals, metal
objects, etc.) on the appliance.
This may result in an electric shock, fi re,
lighted cigarettes, dishes, chemicals, metal
objects, etc.) on the appliance.
This may result in an electric shock, fi re,
-
problems with the product, or injury.
The installation or any service of this appliance
The installation or any service of this appliance
-
is recommended by a qualifi ed technician or
service company.
Failing to do so may result in an electric shock,
service company.
Failing to do so may result in an electric shock,
-
fi re, explosion, problems with the product, or
injury.
Do not touch the power plug with wet hands.
injury.
Do not touch the power plug with wet hands.
-
This may result in an electric shock.
-
This refrigerator must be properly installed and
•
located in accordance with the manual before
it is used.
it is used.
DA68-02616B(0.0).indb 03
DA68-02616B(0.0).indb 03
2012.6.15 7:47:26 PM
2012.6.15 7:47:26 PM