Samsung RF26HFENDSR Manuel D’Utilisation
English - 6
explosion, problems with the
product, or injury.
product, or injury.
• This refrigerator must be
properly installed and
located in accordance with
the manual before it is used.
located in accordance with
the manual before it is used.
• Do not install the refrigerator
in a damp place or place
where it may come in
contact with water.
where it may come in
contact with water.
- Deteriorated insulation of
electrical parts may cause
an electric shock or fire.
an electric shock or fire.
• Connect the power plug in
proper position with the cord
hanging down.
hanging down.
- If you connect the power
plug upside down, wire can
get cut off and a cause fire
or an electric shock.
get cut off and a cause fire
or an electric shock.
• Do not use a cord that
shows cracks or abrasion
damage along its length or
at either end.
damage along its length or
at either end.
• Make sure that the power
plug is not squashed or
damaged by the back of the
refrigerator.
damaged by the back of the
refrigerator.
• When moving the refrigerator,
be careful not to roll over or
damage the power cord.
damage the power cord.
- This constitutes a fire hazard.
• The appliance must be
• The appliance must be
positioned so that the plug is
accessible after installation.
accessible after installation.
• Keep the packing materials
out of reach of children.
- There is a risk of death from
suffocation if children put
them on their head.
them on their head.
• This appliance must be
properly grounded. Do
not ground the appliance
to a gas pipe, plastic
water pipe, or telephone
line.
not ground the appliance
to a gas pipe, plastic
water pipe, or telephone
line.
- You must ground the
refrigerator to prevent any
power leakages or electric
shocks caused by current
leakage from the refrigerator.
power leakages or electric
shocks caused by current
leakage from the refrigerator.
- This may result in an electric
shock, fire, explosion, or
problems with the product.
problems with the product.
- Never plug the power
cord into a socket that is
not grounded correctly
and make sure that it is in
accordance with local and
national codes.
not grounded correctly
and make sure that it is in
accordance with local and
national codes.
• If the power cord is
damaged, have it
replaced immediately by
the manufacturer or its
service agents.
replaced immediately by
the manufacturer or its
service agents.
DA68-02601N-00.indb 6
2017. 1. 23. �� 3:08