Samsung 40" FHD 平面 Smart TV K5300 Series 5 guide électronique

53

Using Anynet+ (HDMI-CEC)

Control the external devices connected via Anynet+ (HDMI-CEC) with the remote control.

You can use the TV's remote control to control external devices that are connected to the TV by an HDMI 
cable and that support Anynet+ (HDMI-CEC). Note that Anynet+ (HDMI-CEC) can only be set by using the 
remote control.

Connecting an external device through Anynet+ and using their menus

     

Settings

   

System

   

Expert Settings

   

Anynet+ (HDMI-CEC)

1. Set 

Anynet+ (HDMI-CEC)

 to 

On

.

2. Connect an HDMI-CEC-compliant device to the TV.

3. Turn on the connected external device. Then the device is automatically connected to the TV. After 
connection is finished, you can use the menus of the connected device by using your remote control.

Read before connecting an Anynet+ (HDMI-CEC)

 

"

Anynet+ cannot be used to control external devices that do not support HDMI-CEC.

 

"

Anynet+ devices must be connected to the TV with an HDMI cable. Note that some HDMI cables may not 
support Anynet+ (HDMI-CEC).

 

"

The TV remote control may not work under certain circumstances. If this occurs, select the Anynet+ device 
again.

 

"

Anynet+ (HDMI-CEC) works only with external devices that support HDMI-CEC and only when those devices are 
either in standby mode or turned on.

 

"

Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type). With home 
theatre systems, however, the only one system can be controlled.

 

"

To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI cable and 
connect the home theatre system directly to the external device's digital audio output connector.

 

"

If an external device has been set by both Anynet+ and a universal remote control, the device can be controlled 
only with the universal remote control.