Samsung VRF530E Robot VC, Visionary Mapping™ -järjestelmä, 0.6 ℓ Manuel D’Utilisation
English
36
Appendic
es
Troubleshooting
Symptom
Checklist
The robot vacuum
cleaner is not working
at all.
cleaner is not working
at all.
• Check if the power switch is on.
• Check if all the icons are displayed on display panel.
• Check if the battery of the robot vacuum cleaner is
• Check if all the icons are displayed on display panel.
• Check if the battery of the robot vacuum cleaner is
depleted.
– When “Lo” is displayed, carry the robot vacuum cleaner
to the charger to charge it.
• Replace the batteries (AAA type) when the remote
controller is not working.
• Check if the dustbin is assembled.
The robot vacuum
cleaner is stopped during
cleaning process.
cleaner is stopped during
cleaning process.
• When “Lo” is displayed on the display panel, carry the
robot vacuum cleaner to the charger to charge it.
• When the robot vacuum cleaner is stuck by the obstacles
such as cord, threshold etc, pick it up to remove it from the
obstacle.
obstacle.
– If any fabric or string is caught in the drive wheel, turn
off the power switch and remove the fabric or string
before using it again.
before using it again.
• When the robot vacuum cleaner stuck to the floor where
there is a height difference, carry it to another area.
Suction power is weak.
• If the filter is clogged, turn off the power switch and clean
the dustbin and filter.
• When there’s too much dust in the dustbin, suction power
may get weakened. Turn off the power switch and empty
the dustbin.
the dustbin.
• If the intake (on bottom of The robot vacuum cleaner) is
blocked by foreign matters, turn off the power switch and
remove foreign matter from the intake.
remove foreign matter from the intake.
• When noise suddenly increase, turn off the emergency
switch and empty the dustbin.
SR5000_5ge_00734F-02_EE.indb 36
2016-05-31 오후 12:04:01