Samsung French Door with Black Stainless CMF, 27.2 cu.ft, 771 L Manuel D’Utilisation
English - 26
Operating your French Door
Refrigerator
Refrigerator
USING THE CONTROL PANEL
( 1 )
( 4 )
( 5 )
( 9 )
( 10 )
( 2 )
( 3 )
( 7 )
( 8 )
( 6 )
( 1 )
Freezer/Power Freeze (3sec)
The Freezer button serves two purposes:
- To set the Freezer to your desired
temperature.
- To turn the Power Freeze function on and
off.
1) To set the Freezer temperature,
touch the Freezer button. You can set the
temperature between 5 °F (-15 °C) and -8 °F
(-23 °C).
2) Power Freeze function
2) Power Freeze function
Touch and hold this button for 3 seconds to
decrease the time needed to freeze products
in the Freezer.
It can be helpful if you need to quickly freeze
easily spoiled items or if the temperature in
the freezer has warmed dramatically (For
example, if the door was left open).
When you use this function, the energy
consumption of the refrigerator will increase.
Remember to turn it off when you don’t
need it and return the freezer to your original
temperature setting.
This icon will light up when you activate the
Power Freeze function. Power Freeze function
generates cool air for 72 hours continuously
and it makes the inside of the refrigerator
cool faster.
When you have enough, just press and hold
the Freeze (Hold 3 sec for Power Freeze)
button again for 3 seconds to cancel the
Power Freeze function.
( 2 )
Alarm/Filter Reset (3sec)
The Alarm button serves two purposes:
- To turn the door open alarm on and off
- To reset the water filter life indicator.
1) Door Alarm Function
If the door alarm is set to On, an alarm beeps
if any refrigerator door is left open for more
than three minutes. The beeping stops when
you close the door. The door alarm function
is pre-set to On in the factory. You can turn it
off by pressing and then releasing the Alarm
button. You can turn it back on in the same
fashion. The icon lights up when the function
is on.
When the Door Alarm function is on and the
alarm sound is triggered, the Door Alarm Icon
will blink while the alarm sounds.
2) Water Filter Life Indicator Function
After you replace the water filter, touch and
hold this button for 3 seconds to reset the
water filter life indicator. When you reset the
water filter life indicator, the Filter icon on the
panel turns Off. The Filter icon will turn red to
let you know it is time to change the water
filter after six months (about 300 gallons).
Some areas have large amounts of lime in
their water, which causes the water filter to
clog more quickly. If this is the case in your
area, you will have to change the filter more
frequently than every six months.
( 3 )
Energy Saver
Touching this button turns Energy Saver
mode on and off. When you turn Energy
Saver on, the Energy Saver icon lights.
Turn Energy Saver off and the icon goes off.
The Energy Saver function’s factory setting is
“ON”. If condensation or water drops appear
on the doors, turn the Energy Saver mode
off.
DA68-02952C (EN)-03.indd 26
2016. 12. 2. �� 6:30