Samsung RT43H5200SL Top Mount Freezer with Digital Inverter Technology, 520L Manuel D’Utilisation
English - 23
02
OPERA
TING
Adjusting the Fridge Temperature
(A TYPE )
(B TYPE )
Fridge
If the food in the refrigerator is not as cold as you
would like or if you wish to lower the temperature
of the refrigerator, set the refrigerator’s Temperature
Controller 5~6 or the Temperature on the Display
model to 1 °C.
If food in the refrigerator is frozen or if you wish
to increase the temperature of the freezer, set the
refrigerator’s Temperature Controller to 1~3 or the
Temperature of the Display model to 3~7 °C.
would like or if you wish to lower the temperature
of the refrigerator, set the refrigerator’s Temperature
Controller 5~6 or the Temperature on the Display
model to 1 °C.
If food in the refrigerator is frozen or if you wish
to increase the temperature of the freezer, set the
refrigerator’s Temperature Controller to 1~3 or the
Temperature of the Display model to 3~7 °C.
• If the room temperature is lower than 10 °C,
do
not set the refrigerator’s Temperature Controller
to 1~2 or the Temperature of the Display model
to 5~7 °C.
Otherwise there may be problems with the
refrigerator’s performance.
to 1~2 or the Temperature of the Display model
to 5~7 °C.
Otherwise there may be problems with the
refrigerator’s performance.
• When the room temperature is higher than
35 °C,
set the Fridge Temperature Controller
on 4~6 or the Temperature of Display model on
1~2 °C.
Otherwise there may be problems with the
refrigerator’s performance.
1~2 °C.
Otherwise there may be problems with the
refrigerator’s performance.
MAKING ICE
TWIST ICE MAKER
Making Ice Cubes
Remove the ice cube tray by pulling it towards you.
Fill the tray with water up to the maximum water
level marked on the rear of the tray.
Slide the tray back into the holder, taking care not
to spill the water.
Wait until the ice cubes are formed.
Remove the ice cube tray by pulling it towards you.
Fill the tray with water up to the maximum water
level marked on the rear of the tray.
Slide the tray back into the holder, taking care not
to spill the water.
Wait until the ice cubes are formed.
Removing the Ice Cubes
Water Level
Make sure that the ice cube storage bin is in place
under the ice cube tray. If not, slide it into place.
Twist one of the levers firmly in the clockwise
direction until the tray twists slightly.
under the ice cube tray. If not, slide it into place.
Twist one of the levers firmly in the clockwise
direction until the tray twists slightly.
Result : The ice cubes fall into the storage bin.
Repeat Step 2 for the other half of the tray, if
necessary.
Remove the storage bin by:
• Lifting it slightly
• Pulling it towards you
Repeat Step 2 for the other half of the tray, if
necessary.
Remove the storage bin by:
• Lifting it slightly
• Pulling it towards you
Danger of explosion
• Glass bottles containing liquids that can
• Glass bottles containing liquids that can
freeze should never be stored in the
freezer as the glass will explode when
the contents freeze.
freezer as the glass will explode when
the contents freeze.
CAUTION
DA68-02960A (EN)-02.indd 23
14. 1. 8. �� 3:42