Samsung RT43H5200SL Top Mount Freezer with Digital Inverter Technology, 520L Manuel D’Utilisation

English - 27

02

 OPERA

TING

REMOVING THE REFRIGERATOR 
ACCESSORIES

While assembling, put the freezer shelf, 

refrigerator shelves and cool pack in the 

correct position and do not put them 

upside down. 

It may cause a personal injury or material 

damage.

1.  Pull out the ice tray and box and then pull out 

the support tray ice. 

•  Be careful when you pull out the ice 

tray support because it will protrude up 
to you suddenly.

•  Be careful when you disassemble and assemble 

the ice tray support because the upper side of 
it has a sharp edge.

•  It may occur finger injury. 

To assemble, place the ice tray support 
above the slots with the right side higher.
Hold it underneath in the middle and push 
the ice tray support until it snaps into place. 

2.  Lift up the freezer shelf or cool pack and pull it 

forward and then pull out the ice tray and box. 
Pull out the support tray ice. (Only for freezer 
shelf or cool pack option model)

3.  Remove ice tray and then lift up the freezer 

shelf, and pull it forward.  
(Only for ice tray option model) 

4.  Pull the the refrigerator shelves towards you.

•   To remove the refrigerator shelves when 

it is possible to open the doors widely, 
pull the shelves forward, lift them up 
and then pull out. 

•  To remove the refrigerator shelves when it is 

impossible to open the doors widely, pull the 
shelves forward, lift them up and tilt in order to 
pull them out.  

•  When you put the shelves back, make sure the 

side with the label “Rear” on it face the rear of 
the refrigerator.

DA68-02960A (EN)-02.indd   27

14. 1. 8.   �� 3:42