Samsung Digital Display Double Wall Oven Manuel D’Utilisation

Page de 156
38  English
Maint
aining y
our applianc
e
Maintaining your appliance
How to run a Hybrid cleaning cycle
1. 
Remove all accessories from the oven.
2. 
Open the oven door, and then touch Reservoir  . The oven ejects the water 
reservoir. Grasp the front of the reservoir and pull it all the way out of the 
slot.
3. 
Pour approximately 20 oz (600ml) of water into the water reservoir. Use 
normal water only, not distilled water. 
NOTE
You can open the reservoir by removing the rubber cap or by removing the clear 
plastic top.
4. 
Replace the rubber cap or clear plastic top.
5. 
Return the reservoir to the slot, and then push it in. There will be slight click 
when it is in place correctly. Touch Reservoir  . The oven retracts the water 
reservoir. 
6. 
Close the oven door.
7. 
Touch Hybrid Clean.
8. 
Touch START/SET. The motor-driven door lock will engage automatically. 
When the operation is complete, the display will blink and a beep will sound.
NOTE
Both oven doors are locked during Hybrid cleaning.
9. 
Touch OVEN OFF.
10. 
Clean the oven’s interior. There will be a significant amount of water 
remaining on the bottom of the oven after a Hybrid cleaning cycle. Remove 
the residual water with a sponge or soft dry cloth.
NOTE
For Hybrid Cleaning, use exactly 20 oz (600ml). of water since this produces the 
best results.
After a Hybrid cleaning cycle
• 
Take care when opening the door after a Hybrid cleaning procedure has 
ended. The water on the bottom is hot.
• 
Open the oven door and remove the remaining water with a sponge. Do not 
leave the residual water in the oven for any length of time. Wipe the oven 
clean and dry with a soft cloth. Do not forget to wipe under the oven door 
seal.
• 
Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the 
oven interior. Remove stubborn residue with a nylon scourer. You can remove 
lime deposits with a cloth soaked in vinegar.
• 
If the oven remains dirty, you can repeat the procedure once the oven has 
cooled.
• 
For heavy residue, such as grease left over from roasting, we recommend 
that you rub detergent into the residue before activating the Hybrid cleaning 
function.
• 
After cleaning, leave the oven door ajar at a 15° angle to allow the interior 
enamel surface to dry thoroughly.
NOTE
• 
You will not be able to start a Hybrid cleaning cycle if the control lockout 
feature is activated or if the oven’s temperature is too hot.
• 
The oven doors lock automatically. The display will show the cleaning time 
remaining. You cannot to open the oven doors until the temperature drops to 
a safe/cool temperature.
• 
The Hybrid clean feature can be used in only one oven at a time. While one 
oven is in Hybrid cleaning mode, you cannot use the other oven for cooking.
• 
If the oven is not clean after one cycle, repeat the cycle.
• 
You cannot set the oven for cooking until the oven is cool enough for the door 
to unlock.
NV51K6650DS_DG68-00854A-00_EN+MES+CFR.indb   38
2016-08-16     6:52:24