Samsung RF26HFENDSL Manuel D’Utilisation
English - 23
SETTING UP
4. After adjusting the doors, insert the supplied
fastener ( 6 ) using a pliers ( 5 ) in the gap
between the hinge-grommet ( 7 ) and the lower
hinge ( 8 ). The number of fasteners you’ll need
to insert depends on the gap.
between the hinge-grommet ( 7 ) and the lower
hinge ( 8 ). The number of fasteners you’ll need
to insert depends on the gap.
2 fastener are enclosed with the
refrigerator.
The thickness of each fastener is 0.04”.
refrigerator.
The thickness of each fastener is 0.04”.
CONNECT THE WATER LINE
TO THE FRIDGE
TO THE FRIDGE
• Connect the plastic line on the back of your
fridge to the cartridge holder outlet (fully insert
the plastic line to the cartridge holder outlet).
the plastic line to the cartridge holder outlet).
• Insert plastic clip to the cartridge holder inlet
and outlet.
• Turn water on and check for any leakage.
• You can purchase the necessary fi lter
cartridge at the retailer where you
purchased this refrigerator.
purchased this refrigerator.
• The water line must be connected to
drinkable water only
• A compression fi tting and nut kit is
supplied with the unit and it is inside the
fridge drawer.
fridge drawer.
• When pushing the Refrigerator back,
make sure you don’t roll over the power
cord or water line(Icemaker supply line)
cord or water line(Icemaker supply line)
Cartridge
Cartridge
Holder
Holder
Holder
Clip
Clip
Filter
Filter
cartridge
cartridge
cartridge
Plastic line
Plastic line
(Provided)
(Provided)
(Provided)
TO USE WITHOUT THE WATER
FILTER
FILTER
Connecting to the water supply line
• Shut off the main water supply line and turn
the Ice maker to the off position.
• Locate the nearest cold water drinking line.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
1. Cold Water line
2. Pipe
2. Pipe
Clamp.
3. Plastic
line
4. Compression
Nut
5. Compression
Sleeve
6. Packing
Nut.
7. Shut Off Valve
Connect the water line to the fridge
Compression
Compression
Nut (Provided)
Nut (Provided)
Nut (Provided)
(6.35 mm)
(6.35 mm)
(6.35 mm)
Ferrule
Ferrule
(Purchased)
(Purchased)
Plastic Tubing
Plastic Tubing
(Provided)
(Provided)
Compression
Compression
Fitting (Provided)
Fitting (Provided)
Fitting (Provided)
Compression
Compression
nut
nut
nut (Purchased)
(Purchased)
(6.35 mm)
(6.35 mm)
Bulb
Bulb
or
or
Copper tubing
Copper tubing
(Not supplied)
(Not supplied)
(Not supplied)
Plastic tubing
Plastic tubing
(Not supplied)
(Not supplied)
(Not supplied)
Household water line
Household water line
Refrigerator
1. Slip the compression nut through the plastic
tubing.
2. After inserting the compression nut into plastic
tubing, tighten the compression nut onto 1/4”
compression fi tting(Provided).
compression fi tting(Provided).
DA68-02601F-00.indb 23
DA68-02601F-00.indb 23
2014. 9. 16.
9:05
2014. 9. 16.
9:05