Manualsbrain.com
  1. Manuels
  2. Marques
  3. Samsung
  4. HM10 SBS with Twin Cooling, 24.52 cu. ft.
  5. Manuel D’Utilisation

Samsung HM10 SBS with Twin Cooling, 24.52 cu. ft. Manuel D’Utilisation

Télécharger
Page de 96
English - 26
3.  Insert a new water filter into the filter housing.
LOCK
UN
LO
CK
LO
CK
LOCK
UN
LO
CK
LO
CK
LOCK
UN
LOC
K
LO
CK
LOCK
UN
LO
CK
LO
CK
LOCK
4.  Turn the new water filter 90˚ clockwise.
LOCK
UN
LO
CK
LO
CK
LOCK
UN
LO
CK
LO
CK
LOCK
UN
LOC
K
LO
CK
LOCK
UN
LO
CK
LO
CK
LOCK
5.  Press and hold the Water button for 3 seconds 
after changing the filter to reset the filter 
indicator.  
Confirm the indicator turns blue. When you 
replace the water filter, some water may leak 
from the water filter housing.  
Make sure to wipe up any leakage that may 
have occurred. 
Removing residual matter from inside the 
water supply line after installing a new 
filter
LOCK
Water
Ice
1.  Turn ON the main water supply.
2.  Press the Water button on the control panel. 
Place a cup or glass under the water outlet, 
and then push the cup or glass against the 
dispenser pad until you hear a “click”.
3.  Flush 3 gallons of water through the filter. 
(Flush approximately 6 minutes.) 
This will clean the water supply system and 
remove air from the lines. 
4.  Additional flushing may be required in some 
households. 
5.  Open the refrigerator door and make sure there 
are no water leaks coming from the water filter.
A newly installed water filter cartridge may 
cause water to briefly spurt from the water 
dispenser.  
This is the result of air getting into the line. 
It poses no problem to the operation of the  
refrigerator.
DA68-02981E-01.indb   26
14. 1. 20.   �� 7:48