Samsung RF26HFENDSG/AP Manuel D’Utilisation
English - 5
SAFETY INFORMA
TION
the appliance may be sited
depends on the amount of
refrigerant used.
depends on the amount of
refrigerant used.
- Never start up an appliance
showing any signs of
damage. If in doubt, consult
your dealer. The room
where the refrigerator will
be sited must be 1 m³ in
size for every 8 g of R-600a
refrigerant inside the
appliance.
The amount of refrigerant in
your particular appliance is
shown on the identifi cation
plate inside the appliance.
damage. If in doubt, consult
your dealer. The room
where the refrigerator will
be sited must be 1 m³ in
size for every 8 g of R-600a
refrigerant inside the
appliance.
The amount of refrigerant in
your particular appliance is
shown on the identifi cation
plate inside the appliance.
- If the appliance contains
isobutane refrigerant
(R-600a), a natural gas
with high environmental
compatibility that is,
however, also combustible.
When transporting and
installing the appliance,
care should be taken to
ensure that no parts of
the refrigerating circuit are
damaged.
(R-600a), a natural gas
with high environmental
compatibility that is,
however, also combustible.
When transporting and
installing the appliance,
care should be taken to
ensure that no parts of
the refrigerating circuit are
damaged.
SEVERE WARNING
SIGNS FOR
INSTALLATION
SIGNS FOR
INSTALLATION
• Do not install this
appliance in a humid,
oily or dusty location, in
a location exposed to
direct sunlight and water
(rain drops).
oily or dusty location, in
a location exposed to
direct sunlight and water
(rain drops).
- Deteriorated insulation of
electrical parts may cause
an electric shock or fi re.
an electric shock or fi re.
• Do not place this refrigerator
in direct sunlight or expose
to the heat from stoves,
room heaters or other
appliances.
to the heat from stoves,
room heaters or other
appliances.
• Do not plug several
appliances into the same
multiple power board.
The refrigerator should
always be plugged into its
own individual electrical
outlet which has a voltage
rating that matched the
rating plate.
multiple power board.
The refrigerator should
always be plugged into its
own individual electrical
outlet which has a voltage
rating that matched the
rating plate.
- This provides the best
performance and also
prevents overloading house
wiring circuits, which could
cause a fi re hazard from
overheated wires. If the wall
socket is loose, do not insert
the power plug.
prevents overloading house
wiring circuits, which could
cause a fi re hazard from
overheated wires. If the wall
socket is loose, do not insert
the power plug.
WARNING
DA68-02601F-00.indb 5
DA68-02601F-00.indb 5
2014. 9. 16.
9:05
2014. 9. 16.
9:05