Samsung RT32FBRNDSP Manuel D’Utilisation
safety information _03
SEVERE WARNING SIGNS
FOR TRANSPORTATION AND
SITE
FOR TRANSPORTATION AND
SITE
• When transporting and installing the
appliance,care should be taken to
ensure that no parts of the refrigerating
circuit are damaged.
ensure that no parts of the refrigerating
circuit are damaged.
Refrigerant leaking from the pipe work could
-
ignite or cause an eye injury. If a leak is
detected, avoid any naked fl ames or potential
sources of ignition and air the room in which the
appliance is standing for several minutes.
This appliance contains a small amount of
detected, avoid any naked fl ames or potential
sources of ignition and air the room in which the
appliance is standing for several minutes.
This appliance contains a small amount of
-
isobutane refrigerant(R-600a), a natural gas
with high environmental compatibility that is,
however, also combustible.
When transporting and installing the appliance,
care should be taken to ensure that no parts of
the refrigerating circuit are damaged.
When transporting and installing the refrigerator,
with high environmental compatibility that is,
however, also combustible.
When transporting and installing the appliance,
care should be taken to ensure that no parts of
the refrigerating circuit are damaged.
When transporting and installing the refrigerator,
•
do not touch the water hose on the back side
of the refrigerator.
This may damage the refrigerator and as a
of the refrigerator.
This may damage the refrigerator and as a
-
result the water dispenser can not be used.
SEVERE WARNING SIGNS
FOR INSTALLATION
FOR INSTALLATION
• Deteriorated insulation of electrical
parts may cause an electric shock or
fi re.
fi re.
Do not place this refrigerator in direct sunlight or
•
expose to the heat from stoves, room heaters
or other appliance.
Do not plug several appliances into the same
or other appliance.
Do not plug several appliances into the same
•
multiple power board.
The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matched the rating plate.
This provides the best performance and
The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matched the rating plate.
This provides the best performance and
-
also prevents overloading house wiring
circuits, which could cause a fi re hazard from
overheated wires.
If the wall socket is loose, do not insert the
circuits, which could cause a fi re hazard from
overheated wires.
If the wall socket is loose, do not insert the
•
power plug.
There is a risk of electric shock or fi re.
There is a risk of electric shock or fi re.
-
Do not use a cord that shows cracks or
•
abrasion damage along its length or at either
end.
Do not pull or excessively bend the power cord.
end.
Do not pull or excessively bend the power cord.
•
Do not twist or tie the power cord.
•
WARNING
WARNING
Do not hook the power cord over a metal
•
object, place a heavy object on the power
cord, insert the power cord between objects, or
push the power cord into the space behind the
appliance.
When moving the refrigerator, be careful not to
cord, insert the power cord between objects, or
push the power cord into the space behind the
appliance.
When moving the refrigerator, be careful not to
-
roll over or damage the power cord.
This may result in an electric shock or fi re.
This may result in an electric shock or fi re.
-
Do not use aerosols near the refrigerator.
•
Aerosols used near the refrigerator may cause
-
an explosion or fi re.
Do not bend the power cord excessively or
Do not bend the power cord excessively or
-
place heavy articles on it.
• This refrigerator must be properly
installed and located in accordance
with the manual before it is used.
with the manual before it is used.
Do not install the refrigerator in a damp place or
•
place where it may come in contact with water.
Deteriorated insulation of electrical parts may
Deteriorated insulation of electrical parts may
-
cause an electric shock or fi re.
Connect the power plug in proper position with
Connect the power plug in proper position with
•
the cord hanging down.
If you connect the power plug upside down,
If you connect the power plug upside down,
-
wire can get cut off and cause fi re or an electric
shock.
Make sure that the power plug is not squashed
shock.
Make sure that the power plug is not squashed
•
or damaged by the back of the refrigerator.
When moving the refrigerator, be careful not to
When moving the refrigerator, be careful not to
•
roll over or damage the power cord.
This constitutes a fi re hazard.
This constitutes a fi re hazard.
-
Keep the packing materials out of reach of
•
children.
There is a risk of death from suffocation if
There is a risk of death from suffocation if
-
children put them on their head.
This appliance should be positioned in such a
This appliance should be positioned in such a
•
way that it is accessible to the power plug.
Failing to do so may result in an electric shock
Failing to do so may result in an electric shock
-
or fi re due to electric leakage.
Do not install this appliance near a heater,
Do not install this appliance near a heater,
•
infl ammable material.
Do not install this appliance in a humid, oily or
Do not install this appliance in a humid, oily or
•
dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location where
sunlight and water (rain drops).
Do not install this appliance in a location where
•
gas may leak.
This may result in an electric shock or fi re.
This may result in an electric shock or fi re.
-
If any dust or water is in the refrigerator, pull
•
out power plug and contact your Samsung
Electronics service center.
Otherwise there is a risk of fi re.
Electronics service center.
Otherwise there is a risk of fi re.
-
Do not stand on top of the appliance or place
•