Samsung RS25H5005SL Manuel D’Utilisation
English - 19
01
SETTING
UP
2. Separate the water supply line from
the refrigerator
the refrigerator
1. Remove one or two water lines, depending on
) and
) away.
(1)
(2)
Your refrigerator may have one or two
water lines, depending on the model.
If it has two, the lines are different colors.
Make sure you match the colors when you
re-attach them.
water lines, depending on the model.
If it has two, the lines are different colors.
Make sure you match the colors when you
re-attach them.
Do not cut the water line.
Gently separate it from the coupler.
Gently separate it from the coupler.
3. Remove the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so
the hinges are not bent or broken.
• Be careful not to pinch the water tubing and
wire harness on the door.
• Place doors on a protected surface to prevent
scratching or damage.
• Is necessary, have two people disassemble the
doors.
CAUTION
1. With the Freezer door closed, remove the
1
and then disconnect the wires by gently pulling
2
(2)
(1)
Be careful not to damage the sensor
harness with the hinge cover.
harness with the hinge cover.
2.
3
Socket Wrench.
4
counter-clockwise.
5
the arrow.
Take care that the door does not fall on you.
Take care that the door does not fall on you.
(4)
(3)
(5)
Pressing
3. Open the Freezer door, and then remove the
6
7
(7)
(6)
DA68-02981F (EN)-150612.indd 19
2015. 6. 12. 11:20