Samsung SC8285 Manuel D’Utilisation

10_ maintain

Maintain tools and fi lter

MINI TURBO BRUSH (OPTIONAL)

-  TO REPLACE BRUSHROLL

 

1.  If a clog is present or debris is visible, unscrew the two 

screws on the back of the Mini turbo brush to remove 
the faceplate and clear any obstructions.

  2. Inspect condition of brushroll.
     Replace brushroll if brushes are worn down.
     To remove brushroll, pull up and out of end slots in    

nozzle housing.

    Insert ends of brushroll into same slots to replace.

       Inspect belt to ensure that it is in good condition.
      If belt is broken or cracked, replace belt according to
 

    To Replace Belt instructions.

  3. Using at MAX.
     Press the MAX button to operate the vacuum at 

maximum intake.

- TO REPLACE BELT

  1. Remove bottom plate.
    See fi gure in To Replace Brushroll instructions.

  2. Loop one end of new belt around shaft of pulley.

 3. 

 

Loop other end of belt around designated area for it on 
brushroll. Insert brushroll into slots in nozzle housing.

    See fi gure in To Replace Brushroll instructions.

 

4. Fit Mini turbo brush back together as described in To

  Replace 

Brushroll 

instructions.