Samsung Forno Multifunzione Compact NQ50H7935ES Manuel D’Utilisation

descaling and cleaning

DESCALE MODE

When you see the message   on the display, the oven needs to be descaled.

If you do not perform to 2 step of descale mode (cleaning and rinse mode), the descale 

message does not disappear. Since then you operate the steam mode 2 more hours 

after the descale message is displayed, the steam-related functions are limited.

1.  Pour 500 ml mixed solution of descaler and 

clean water in the water tank. Regarding 

to mixing ratio, refer to the user manual of 

descaler.

2.  Close the lid of water tank before installing into 

main unit.

3.  Turn the MODE SELECTOR to “OFF” position.

4.  Close the door and press and hold down 

both END TIME and SELECT. The machine 

displays 50 minutes and starts descaling.

•  Cleaning Mode: 40 min

•  Rinse Mode: 10 min

5.  When it has progressed for about 40 minutes, 

the machine displays “10:00” and stops 

operating with a beep. 

Remove the tank and empty any remaining 

mixed water. 

Wash the tank with water and fill up to the 

maximum line with clean water. 

Put it back into the main unit.

•  When ‘10:00’ is displayed, you have to operate the rinse mode within 

25 minutes. If you do not, the set will be reset after 25 minutes and then 

you will perform the descale mode again.

NQ50H7935ES_ET_DG68-00471H-01_EN.indb   54

2014-10-23     11:35:07