Samsung RT28K3022SE Manuel D’Utilisation
Installation
English 19
STEP 2 Flooring
• The surface to install the refrigerator
must support a fully loaded refrigerator,
or approximately 100 kg.
or approximately 100 kg.
• To protect the floor, put a large piece
of cardboard on each leg of the
refrigerator.
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpets along the movement
path.
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpets along the movement
path.
STEP 3 Adjust the levelling feet
Level the refrigerator by manually
adjusting the levelling feet. Turn the
levelling feet clockwise to lower the
position, or turn counter clockwise to raise.
For safety reasons, adjust the front side a
little higher than the rear side.
adjusting the levelling feet. Turn the
levelling feet clockwise to lower the
position, or turn counter clockwise to raise.
For safety reasons, adjust the front side a
little higher than the rear side.
Untitled-1 19
2015-11-26 11:12:18