Samsung RF30HMEDBSL Manuel D’Utilisation

English - 27

O

p

ERA

TIN
g

The Fridge button serves two purposes:

- To set the Fridge to your desired temperature.

- To turn the Power Cool function on and off.

1)  To set the Fridge temperature, press the

Fridge button. You can set the temperature
between 7 °C (44 °F) and 1 °C (34 °F).

2)  Power Cool function
Touch and hold this button for 3 seconds to
decrease the time needed to cool products
in the Refrigerator. It can be helpful if you
need to quickly cool easily spoiled items or
if the temperature in the fridge has warmed
dramatically (for example, if the door was left
open).

( 5 )  Lighting/ºC ↔ ºF (3sec)

The Lighting button serves two purposes:

- To turn the dispenser light on and off

- To switch the temperature units between ºC

and ºF

1)  Light Function
Touching the Lighting button turns on the
Dispenser LED lamp in continuous mode so that
it stays on continuously. The button also lights
up. If you want the Dispenser lamp to come on
only when some one uses the dispenser, press
the Lighting button to turn the continuous mode
off.

2)  To switch the temperature units between ºC

and ºF

Touch and hold this button for 3 seconds to
select the temperature display you want.
Each time you press and hold the button, the ºC
and ºF temperature modes alternate and the ºC
or ºF icon lights up, indicating your selection.

The Ice Maker Off button serves two purposes:

- To turn the Ice maker on and off

- To turn the Control Lock Function on and off.

1)  Ice Off Function
If you don’t want to make more ice, press the Ice
Maker Off button.

2) Control Lock Function
Touch and hold this button for 3 seconds to
lock the display, the Flex Zone panel, and the
dispenser buttons so the buttons can not be
used.
When Control Lock is on, the refrigerator does
not dispense ice or water, even if the Dispenser
Lever is pressed.
The Control Lock icon lights up to indicate
you’ve activated the Control Lock function. Press
3 seconds to unlock.

Touch this button to dispense water. This
mode can not be used with the Ice Type mode
simultaneously.
Water mode shuts off when you touch the
Cubed/Crushed Ice button.

Water filter usage
This icon lights up when you need to change the
filter, usually after the refrigerator has dispensed
about 300 gallons of water (after about
6 months). The icon will blink red for several
seconds when you open or close the door.
After you install the new water filter, reset the
filter indicator by touching and holding the Hold
3 sec for Filter Reset button for 3 seconds.

- If water is not dispensing or dispensing

slowly, you need to replace the
water filter because the water filter is
clogged.

- Some areas have large amounts of

lime in their water, which causes the
water filter to clog more quickly.

Touch this button to select your desired ice type.
Cubed and crushed ice modes alternate when
you press the button. This mode can not be
used with the Water mode simultaneously.

DA68-02952D-02.indb   27

2016. 12. 16.   �� 7:50