Samsung RF26NBSH Manuel D’Utilisation
REMOVING ThE REFRIGERATOR DOORS
• To reattach the Refrigerator doors, assemble parts in reverse order.
Be careful not to missplace the parts of refrigerator.
REMOVING ThE REFRIGERATOR DOORS
1. Pull the drawer open to full extension.
2. Remove the tilting pocket by pulling both brackets upward at the same time.
3. Take out the lower basket by lifting the basket up from rail system.
2. Remove the tilting pocket by pulling both brackets upward at the same time.
3. Take out the lower basket by lifting the basket up from rail system.
4. Remove a fixing pin(
1
) and remove a
shaft (
2
) by pushing it to the right side
with your hand.
2
1
5. Separate the rail from the rail cover by
pushing the hooks (
3
) in on both sides of
the rail. After pushing the hooks in, remove
the drawer by pulling towards you with both
hands.
3
ASSEMblE ThE FREEZER DRAWER
• To assemble the freezer doors, assemble parts in reverse order.
Be careful not to missplace the parts of refrigerator.
ADJUSTING ThE DOORS
Now that the doors are back on the Refrigerator, you want to make sure the
Refrigerator is level so that you can make final adjustments. If the Refrigerator is not
level, it will not be possible to get the doors perfectly even.
Refrigerator is level so that you can make final adjustments. If the Refrigerator is not
level, it will not be possible to get the doors perfectly even.
10_Setting Up
CAUTION
CAUTION
DA99-01623A-05.indd 10
2010.10.15 8:32:19 AM