Samsung RF26NBSH Manuel D’Utilisation

Connecting to the water supply 

line

1. First, shut off the main water supply line.
2. Locate the nearest cold, drinking water line.
3.  Follow the Water line Installation 

Instructions in the installation kit.

The water line must be 

connected to the cold water 

pipe. If it is connected to the 

hot water pipe, it may cause 

the purifier to malfunction.

4.  After connecting the water supply to the water filter, turn your main water 

supply back on and dispense about 3L to clear and prime the water filter.

Connecting the water line to the refrigerator

1.  Remove the cap from water line on the unit and insert compression nut to 

the water line on the unit after disassembling from provided water line.

2. Connect both water line from the unit and water line in the kit.
3.  Tighten the compression nut onto the compression fitting. There should be 

no gaps between (A, B & C )

4. Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 6.5mm of the 

plastic tubing to make sure you get a snug, leak-free connection.

Before being used, the leakage in these places should be examined

•   Samsung Warranty does not cover WATER 

LINE INSTALLATION.

•   It will be done at customer’s charge unless the 

retail price includes installation cost.

•   Please contact Plumber or Authorized Installer 

for the installation if needed.

•   If Water leakage occurs due to improper 

installation, Please contact installer.

14_Setting Up

DA99-01623A-05.indd   14

2010.10.15   8:32:28 AM