Samsung RF80K9070SR Manuel D’Utilisation

English

46 

Maintenance

Handle and care

Icemaker bucket

If you do not dispense ice for an extended period, ice may form clumps inside the bucket. 
If this happens, remove and empty the icemaker bucket.

1.  To remove the ice maker bucket, gently 

lift it up and pull out slowly while 
holding the bottom of the bucket with 
one hand and the side with the other 
hand.

2.  Lift up and pull the bucket out. Empty 

the bucket.

3.  When done, put the bucket back into 

position. If the bucket does not fit in, 
turn the helix screw by 90 degrees and 
try again.

CAUTION

•  Do not apply excessive force to the bucket cover. The cover may break.
•  Do not forcefully close the door. Water may spill over the ice maker.
•  To prevent injury, make sure to clean up any ice or water that has fallen on the floor.
•  To prevent accidents or injury, do not let children play with the water dispenser or the 

ice maker.

•  Do not put your hand or an object into the ice chute. This may cause physical injury or 

product damage.

•  Use only the provided ice bucket. Third-party ice buckets may cause a system failure.
•  Use only potable water that is connected to the water supply line.

NOTE

•  The required water pressure for ice making is between 20 psi and 125 psi.
•  If the Ice Off indicator blinks, remove and reinsert the ice bucket. Make sure it is 

reinserted properly.

•  Any sound from the ice maker is normal, which outputs during the ice making process.
•  While the door is open, neither the ice maker nor the water dispenser operates.

Maintenance

Untitled-5   46

2016-10-17     11:41:58