Samsung RF80K9070SR Manuel D’Utilisation
Maintenance
English
52
Maintenance
NOTE
To prevent overflow, empty and dry the
water filter tray.
water filter tray.
4. Insert a new filter cartridge. Use only
Samsung-provided or -approved filters.
5. Turn the cartridge knob clockwise to
lock into place.
6. Press and hold Cubed Ice on the feature
panel for 3 seconds to reset the filter.
The filter indicator ( ) turns off.
The filter indicator ( ) turns off.
7. When replacing is complete, open the
water valve and run water through the
dispenser for about 7 minutes. This is
to remove impurities and air from the
water line.
dispenser for about 7 minutes. This is
to remove impurities and air from the
water line.
NOTE
• A newly installed filter may cause the water dispenser to spurt water briefly. This is
because of air entering the waterline.
• This replacement process cause the refrigerator to drip water onto the floor. Simply
wipe up with dry cloths.
Reverse osmosis water filtration system
The water pressure of the water supply system to a reverse osmosis water filtration
system must be between 35 psi and 120 psi (241 kPa and 827 kPa).
The water pressure of the water supply system to a reverse osmosis water filtration
system must be between 35 psi and 120 psi (241 kPa and 827 kPa).
Untitled-5 52
2016-10-17 11:42:00