Samsung WB30H7000GS/SE Manuel D’Utilisation

Page de 72
English - 31
TROUBLESHOO
TING
Troubleshooting
Check the table below if the washing machine...
If after requesting technical assistance and the problem is not considered a malfunction, you will be 
charged for service even though the product is still under warranty.
Problem
Checkpoints
Action
Power does not turn 
on.
Check if the electric voltage is 
normal.
This product can only be used 
with 220 V.
Check if the power cord is 
completely plugged in.
Plug in the power cord.
Water does not drain.
Check if the drain hose is correctly 
placed.
Ensure that the drain hose is 
placed properly.
Check if the drain hose is twisted. Make sure the drain hose is not 
twisted.
Check if the outlet of the drain 
hose is clogged.
Unclog the outlet and the 
surrounding area.
Washing machine does 
not operate.
Check if the door is closed.
Close the door.
Check if the washing machine is 
in the Pause status.
Press Start/Pause button again 
and check if washing proceeds.
Check if water has reached the 
preset water level.
If the water pressure is low, it 
takes a longer time.
Check if the water tap is closed.
Open the tap.
Check if the Child Lock is set.
No key is enabled if the Child 
Lock is set. Release the Child 
Lock.
The drain hose and tub 
are frozen
•  Apply some hot water on the tap to disconnect the water supply 
hose and place the hose in hot water.
•  Pour warm water into the tub and wait about 10 minutes.
•  Cover a hot, wet cloth around the connection of the water hose.
•  As the water supply hose defrosts, reconnect the hose and check 
if water supply is normal.
The tub won't keep 
water and it drains 
immediately.
•  Check if the water outlet is clogged with something, such as coins 
or pins.
•  Hang the drain hose on the drain hose hook. Pour water into the 
tub to the half-way mark and then run the Spin cycle.
Untitled-2   31
2014-11-18     10:32:24