kymco mo d200 Instruction De Maintenance

19

. SWITCHES/HORN/FUEL UNIT/THERMOSTATIC SWITCH

/TEMPERATURE GAUGE/INSTRUMENTS/LIGHTS

19-8

LIGHTS

HEADLIGHT BULB REPLACEMENT
Remove the front upper cover. (2-5)

Disconnect the headlight and turn signal light

wire couplers.

Remove the rubber boot from the bulb socket.

Remove the bulb socket and replace the bulb.

Install the bulb socket, aligning the bulb

socket tab with the groove.

Install the rubber boot.

Install the front cover in the reverse order of

removal.

FRONT POSITION LIGHT BULB

REPLACEMENT
Remove the front upper cover. (2-5)

Disconnect the headlight and turn signal light

wire couplers.

Remove the bulb sockets by turning them

counterclockwise.

Remove the bulbs and replace them with new

ones.

FRONT TURN SIGNAL LIGHT BULB

REPLACEMENT
Remove the two screws attaching the turn

signal light shell and remove the light shell.

Remove the bulb and replace with a new one.

TAILLIGHT/REAR TURN SIGNAL LIGHT

BULB REPLACEMENT
Remove the rear protective cover. (2-3)

Remove the two screws attaching the rear

light shell and remove the light shell.

Remove the bulbs and replace with new ones.

The installation sequence is the reverse of

removal.

Screws

Front Position Light Bulb Sockets

Wire

Bulb Socket

Screws

Wire