kymco mo d200 Instruction De Maintenance

20

. EXHAUST EMISSION CONTROL

SYSTEM

20-3

SECONDARY AIR CLEANER /

AIR INJECTION CUT-OFF

VALVE (A.I.C.V.)

REMOVAL
Remove the seat. (2-4)

Remove the body cover.

Disconnect the secondary air cleaner

/(A.I.C.V) connecting tube.

INSPECTION
Inspect the air injection cut-off valve flow

using a vacuum pump. If the flow is not

within the specified values, replace with a

new one.

The flow should be at least 30 liter/min

when a vacuum of 250mm/Hg is applied.

The flow should be at least 1.6 liter/min

when a vacuum of 320mm/Hg is applied.

Check each connecting tube for cracks or

damage and replace if necessary.

INSTALLATION
The installation sequence is the reverse of

removal.

• The secondary air cleaner must be

assembled and installed properly to

avoid dust entering the air cleaner.

• When installing, be careful not to

bend or twist the tubes and check

for proper installation.

• The tube length is very important to

its performance, use the tube of

same specification for replacement.

＊

Air Inlet Tube

Bolt

Secondary Air Cleaner / A.I.C.V.

Air Outlet Tube

Air Inlet Tube

Air Outlet Tube

Bolt

Vacuum Tube

Bolt

Vacuum Tube

Bolt