Acer extensa-7x0

22

Lucent Technologies Inc.

(continued)

S48 = 7

Negotiation enabled.

S 48 = 128 Negotiation disabled; forces immediate fallback options specified in S36.

The following chart lists the S36 and S48 configuration settings necessary to negotiate certain types of
connections.

S36 = 0, 2

LAPM or hangup

do not use

S36 = 1, 3

LAPM or async

async

S36 = 4, 6

LPAM, 

MNP, or hangup

MNP or hangup

S36 = 5, 7

LAPM, 

MNP, or async

MNP or async

This command displays the number of seconds of inactivity (no characters sent from the DTE, no RING) in the off-
line command state before the modem places itself into standby mode.  A value of zero prevents standby mode.

Note:  If a number between 1 and 4 is entered for this register, it will set the value to 5, and the inactivity before
           standby will be 5 seconds.  This is done for compatibility with previous products which allowed time-outs
           down to 1 s.

Range:

0, 5—255

Default:

10

This register tells the status of the Local Phone. It is read only.

0 = local phone on-hook

1 = local phone off-hook

This register is effective only for Japan.  It specifies the line transmit level in dB with an implied minus sign.

Range:

6—15

Default:

15

Units:

1 dB