Acer extensa-7x0

Lucent Technologies Inc. 

25

This command causes the modem to display the current setting.  The modem can operate either as a Class 0 data
modem or a class 1 FAX modem.

Typical responses:

+FCLASS?

000 if in data mode; 001 if in FAX class 1, 008 if in voice mode, and 080 if in
VoiceView

†

 mode.

This command causes the modem to display the classes it supports.

Typical responses:

+FCLASS = ?

0, 1, 8, 80

This command sets the modem for class n operation, where n is either a 0 or 1.

Parameters:

0, 1, 8, 80

Default:

0

Command options:

+FCLASS = 0

Select data mode.

+FCLASS = 1

Select Facsimile Class 1.

+FCLASS = 8

Select voice mode.

+FLCASS = 80 Select 

VoiceView mode.

This command causes the modem to stop transmitting data and pause for 10 * n ms.  At the end of this period, the
modem then responds OK.  You can specify any number from 0 through 255 as the value of n; for example, a
value of 5 specifies a period of 50 ms.

n = 0



255 (10 ms intervals)

This command causes the modem to listen and wait for a 10 * n ms period of silence on the line.  At the end of this
period, the modem then responds OK.  You can specify any number from 0 through 255 as the value of n; for
example, a value of 5 specifies a period of 50 ms.

n = 0



255 (10 ms intervals)

†

 

VoiceView

 is a registered trademark of Radish Communications Systems, Inc.