Acer g243hq Manuel D’Utilisation

To install the monitor to your host system, please follow the steps as given below: 
 

Steps 

1.  1-1  Connect Video Cable 

 

a. Make sure both the monitor and computer are powered-OFF. 

 

b. Connect the VGA video cable to the computer. 

 

1-2  Connect Digital Cable (Only Dual-Input Model) 

 

a. Make sure both the monitor and computer are powered-OFF. 

 

b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to 

the computer's port. 

 

1-3  Connect HDMI Cable (Optional) 

 

a. Make sure both the monitor and computer are powered-OFF. 

 

b. Connect one end of the 19-pin HDMI cable to the back of the monitor and the other end to the 

computer's port. 

2. 

Connect power cord 
Connect the power cord to the monitor, then to a properly grounded AC outlet. 

3. 

Power-ON Monitor and Computer 
Power-ON the monitor first, then power-ON the computer. 
This sequence is very important. 

4. 

If the monitor still does not function properly, please refer to the troubleshooting section to diagnose 
the problem.