Benq PB8250 Manuel D’Utilisation
Introduction
10
Remote Control Effective Range
Infra Red (IR) remote control sensors are located on the front and the back of the projector.
The remote control must be held at an angle within 30 degrees of the projector’s IR remote
control sensors to function correctly. The distance between the remote control and the sen-
sors should not exceed 6 meters (19.5 feet).
The remote control must be held at an angle within 30 degrees of the projector’s IR remote
control sensors to function correctly. The distance between the remote control and the sen-
sors should not exceed 6 meters (19.5 feet).
Warning Messages on the Back of the Remote Control
The laser beam is visible. It
is necessary to depress
the Laser button for contin-
uous output.
is necessary to depress
the Laser button for contin-
uous output.
The laser pointer is not a
toy. Parents should treat
them with the appropriate
care. This is a useful tool
for adults that should be
used by children only with
adequate supervision.
toy. Parents should treat
them with the appropriate
care. This is a useful tool
for adults that should be
used by children only with
adequate supervision.
6m
ATTENTION
LASER DIODE
ACHTUNG