Apple power mac g5 late 2004 Instructions De Fixation
Power Mac G5 Access Panel -
3
3. Install the replacement access panel by inserting the tab on the bottom edge of the
panel into the channel in the bottom frame of the enclosure. Then rotate the panel up
flush against the top frame.
flush against the top frame.
Note:
Make sure the latch is in the up position before replacing the access panel. If
the latch is down, the access panel will not seat correctly in the enclosure.
4. Push the latch down to close and secure the access panel.
Warning:
Never turn on the computer unless all of its internal and external parts are
in place and it is closed. Operating the computer when it is open or missing parts can
damage it or cause injury.
damage it or cause injury.
Apple Computer, Inc.
© 2003 Apple Computer, Inc. All rights reserved.
This document is protected under U.S. Copyright Law and International Treaties, and no
part of this document may be reproduced in any form without written permission from
Apple.
part of this document may be reproduced in any form without written permission from
Apple.
Apple is not responsible for typographical, printing, or inadvertent errors.
Apple Computer, Inc.
1 Infinite Loop
Cupertino, CA 95014-2084
USA
+ 1 408 996 1010
http://www.apple.com
1 Infinite Loop
Cupertino, CA 95014-2084
USA
+ 1 408 996 1010
http://www.apple.com
Apple, the Apple logo, Mac, Macintosh, and the Mac logo are trademarks of Apple
Computer, Inc., registered in the U.S. and other countries.
Computer, Inc., registered in the U.S. and other countries.