abit ax8 rev 1 Manuel D’Utilisation
3-20
Chapter 3
3-6. Power Management Setup
ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1 (PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3 (Suspend-To-RAM)]: Enables the Suspend to RAM function.
Soft-Off by PWRBTN:
This item selects the method of powering off your system:
[Delay 4 Sec]: Pushing the power button for more than 4 seconds will power off the system. This will
prevent the system from powering off in case you accidentally hit or pushed the power button.
prevent the system from powering off in case you accidentally hit or pushed the power button.
[Instant-Off]: Pressing and then releasing the power button at once will immediately power off the
system.
system.
Run VGABIOS if S3 Resume:
Three options are available: Auto
Yes No. The default setting is Auto. This item can let you choose
when S3 resume active, the VGA BIOS need to be initiative or not.
Restore On AC Power Loss:
This item selects the system action after an AC power failure.
[Power Off]: When power returns after an AC power failure, the system’s power remains off. You must
press the Power button to power-on the system.
press the Power button to power-on the system.
[Power On]: When power returns after an AC power failure, the system’s power will be powered on
automatically.
automatically.
[Former-Sts]: When power returns after an AC power failure, the system will return to the state where
you left off before power failure occurs. If the system’s power is off when AC power failure occurs, it
will remain off when power returns. If the system’s power is on when AC power failure occurs, the
system will power-on when power returns.
you left off before power failure occurs. If the system’s power is off when AC power failure occurs, it
will remain off when power returns. If the system’s power is on when AC power failure occurs, the
system will power-on when power returns.
AX8 Series