Juniper CBL-PWR-10AC-STR-JP Manuel D’Utilisation
The following drive has been verified to work in the RE-B-1800 Routing Engines:
•
SSD SLC 64 GB
To replace a storage drive:
1.
Disable and deactivate the storage drive.
2.
Remove the storage drive.
a.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and
connect the strap to an ESD point on the appliance.
connect the strap to an ESD point on the appliance.
b.
Unfasten the thumbscrew that secures the access door in front of the storage drive
slots, and open the door.
slots, and open the door.
c.
Slide the lock on the ejector to the unlocked position.
d.
Carefully slide the drive out of the slot.
3.
Reinstall the storage drive.
a.
Carefully align the sides of the drive with the guides in the slot.
b.
Slide the drive into the slot until you feel resistance, carefully ensuring that it is
correctly aligned.
correctly aligned.
c.
Close the access door and tighten the thumbscrew to secure the door.
4.
Mount the new storage drive.
Related
Documentation
Returning a Hardware Component to Juniper Networks, Inc.
•
Removing and Inserting the CompactFlash Card
The CompactFlash card is an optional component of the M7i router. If installed, it provides
primary storage for the router. It can accommodate software images, configuration files,
and microcode.
primary storage for the router. It can accommodate software images, configuration files,
and microcode.
To remove, insert and configure an CompactFlash card, perform the following procedures:
•
•
•
105
Copyright © 2012, Juniper Networks, Inc.
Chapter 15: Replacing M7i Hardware Components