Alcatel-Lucent OmniAccess 3500 Mode D'Emploi

When installing, operating, or maintaining this equipment, basic safety precautions 
should always be followed to reduce the risk of fire, electric shock, and injury to 

persons, including the following: 
•  Read and understand all instructions contained in this guide. 
•  Handle this product in conformity with the applicable building code. 
•  Follow all warnings and instructions marked on the gateway appliance and 

accessories. 

•  Do not place this product on an unstable cart, stand or table. The product may fall 

and receive serious damage. 

•  This product should be operated only from the type of power source indicated on 

the marking label. If you are not sure of the type of power supply, consult your 
dealer or local Power Company. 

•  Unplug this product from the wall outlet before cleaning. Do not use liquid 

cleaners or aerosol cleaners. Use a damp cloth for cleaning. 

•  Do not use this product near water (e.g., in a wet basement). 
•  Never push objects of any kind into this product through slots as they may touch 

dangerous voltage points or short-out parts, which could result in a risk of fire or 
electrical shock. Never spill liquids of any kind on the product. 

•  Slots and openings in the unit are provided for ventilation, to protect it from 

overheating; these openings must not be blocked or covered. This product should 
not be placed in a built-in installation unless proper ventilation is provided. 

•  Never disassemble this product. The product does not contain serviceable parts. 

Opening or removing covers and/or circuit boards may expose you to dangerous 

voltages or other risks. Incorrect reassembly can cause electric shock when the 
unit is subsequently used. 

•  This product is equipped with a three-wire grounding type plug, a plug having a 

third (grounding) pin. This plug is intended to fit only into a grounding type power 
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, 
contact your electrician to replace your obsolete outlet. Do not defeat the safety 
purpose of the grounding type plug. Do not use a 3-to-2-prong adapter at the 
receptacle. Use of this type of adapter may result in risk of electrical shock and/or 
damage to this product. 

•  Do not allow anything to rest on the power cord. Do not locate this product where 

a person can walk on the cord and abuse it. 

•  Do not overload wall outlets and extension cords as this can result in the risk of 

fire or electric shock. 

•  Unplug this product from the wall outlet and refer to qualified service personnel 

under the following conditions: 

o

 

When the power supply cord or plug is damaged or frayed. 

o

 

If liquid has been spilled into the product. 

 

 

 

2