Alcatel-Lucent t60 Manuel D’Utilisation

NOTE: Program the following settings before using the 
phone.

There are 6 options to set:

1. Rotate the wall mounting knob as shown below:

Wall mounting
knob Location

Rotate 180°

WALL MOUNTING: The knob is designed
to keep this unit in place when the 
telephone is vertically placed on the wall. 

2. Install the base unit to the wall and then plug one end of line 
    cord into the base and the other end into the modular telephone
    line jack.
3. Fix the telephone on the wall as shown below.

To use this phone, you need a RJ11C type modular telephone jack,
(similar to the one pictured here) installed in your home. Call your 
local phone company to have one installed.

NOTE: If there is any item missing in the package, please
contact the shop where you bought this product. 

‡

Never install telephone wiring during a lightning storm. 

‡

Never touch un-insulated telephone wires or terminals, unless 

   the telephone line has been disconnected at the network
   interface. 

‡

Install or modify telephone lines with caution. 

‡

Never install telephone to operate in wet or damp locations. 

CAUTION: Disconnect the phone cord from the wall 
outlet before installing or replacing the batteries. 

Your Caller ID phone uses 3 AA-Size alkaline batteries for receiving 
and storing Caller ID records and storing the number. 

IMPORTANT: If you are not going to use the telephone 
for more than 30 days, remove the batteries.

Month

Day

Hour

Low battery indicator

Speakerphone

Mute Mic Repeat New CID Call-log

Number

Voice mail

Morning

Afternoon

Minutes

Down button

Mute button
Flash button
M4 button
M3 button

Dial back button

Up button

Menu button

Delete button

Store button

M1 button
M2 button

Speaker Volume button

Speaker button

Display

Ringer Volume Switch

Your package includes the following items:

User’s Guide          Base          Handset     Coiled cord     Line cord

<RXU&DOOHU,'SKRQHVWRUHVDQGGLVSOD\VVSHFL¿FLQIRUPDWLRQ
provided by your local telephone company, to subscribers of 
&DOOHU,'RUVLPLODUFDOOHULGHQWL¿FDWLRQVHUYLFHV

‡

FSK/DTMF auto detect.

‡

Alphanumerical backlight display.

‡

6 languages interface selection.

‡

Record up to 58 incoming caller names and numbers. 

‡

Record up to 10 recent dialed numbers. 

‡

10 two-touch memories.

‡

4 one-touch memories.

‡

Redial.

‡

Pulse or Tone dialing mode.

‡

Flash timing selectable.

‡

Mute function.

‡

Speakerphone.

Hook switch. The part of the phone that pops up to activate the 
phone line when the handset is lifted from the base. 
Off-hook. The phone is in active mode when the handset is off 
the base cradle or the SPEAKER feature is on.
On-hook. The phone is in standby mode when the handset is on 
the base cradle. 

Your Caller ID phone enables you to:

‡

Identify callers before you answer the phone.

‡

View the time and date of each incoming call.

‡

Record up to 58 Caller ID name and number messages

   sequentially. 

To get the most from your new phone, please read through this 
user’s guide.

1. If the telephone line cord is connected, disconnect it from the 
    base unit.
2. Carefully turn the phone over, use a pen or paper clip to loosen 
    the battery cover. Open the battery compartment by pushing 
    on the battery cover and sliding it away from the unit. 
3. Insert 3 AA-size alkaline batteries (not included) as shown on 
    the engraving in the battery 
    compartment.
4. Snap the battery compartment
    door back into place.
5. Reconnect the telephone 
    line cord to the base. 

Your phone should be placed on a level surface, such as a desk or
table top, or you can mount it on a wall. 
1. Connect the handset.
2. Connect the telephone
    line.

Phone

number display

Name display

Microphone

Redial/Pause button

Time format

Date format

English/French/Spanish/
Turkish/Polish/Greece

Enter Month, Day,
Hour and Minute

OR

OR

Select Language

OR

OR

The area code prior to an incoming number will be removed from
the caller ID display if it matches with the area code you set. 

Enter your area code

OR

Enter your long 

distance code 

OR

Select timing

100/300/1000/600

OR

OR

Select Tone or Pulse

OR

OR

ALCATEL T60

ATLINKS Europe, 22 quai Gallieni 92150 Surensnes - France
Alcatel Logo and Alcatel name are trademarks of Alcatel Lucent and used under license by Atlinks.

ALCATEL T60

ATLINKS Europe, 22 quai Gallieni 92150 Surensnes - France
Alcatel Logo and Alcatel name are trademarks of Alcatel Lucent and used under license by Atlinks.

:+>ਸ਼ކપޢа࠳வ1࣒މ৚ु͹4:ޛ386࣒މ৚ु͹:>>