ASUS dual pentium iii group server ap200 Manuel D’Utilisation
30
V. Appendix
AP200 Hardware Reference Guide
V
. Appendix
SCSI Cabling
ii. SCSI Connection Example
This is an example of how SCSI devices can be connected to your server.
•
Two 9GB Ultra2-SCSI hard disks in the 3.5” cage can be connected to
the Ultra2 connector on the motherboard for 18GB of main storage.
the Ultra2 connector on the motherboard for 18GB of main storage.
•
One Ultra-SCSI tape drive in the 5.25” cage is connected to the 50-pin
narrow connector on the motherboard for routine backups.
narrow connector on the motherboard for routine backups.
•
The Wide-SCSI connector on the motherboard can be extended (using
an optional SCSI cable with external bracket) to the chassis slot opening
for connection of an external 4GB Ultra-Wide hard disk drive and a
Wide-SCSI CD recorder for archives.
an optional SCSI cable with external bracket) to the chassis slot opening
for connection of an external 4GB Ultra-Wide hard disk drive and a
Wide-SCSI CD recorder for archives.
Example of SCSI connections
68-pin Ultra2 Hard Disks
IDE Hard Disk Drive
68-pin Ultra2 Cable
50-pin SCSI Tape Drive
(Terminated)
(Terminated)
IDE CD-ROM Drive
Terminator
50-pin Fast/Ultra-Narrow Cable
68-pin Fast/Ultra-Wide Cable
68-pin Fast/Ultra-Wide Cable
68-pin external SCSI connector
68-pin Wide-SCSI CD-R Drive
(with external casing & power)
(Terminated)
(with external casing & power)
(Terminated)
68-pin Ultra-Wide Hard Disk
(with external casing & power)
(with external casing & power)
You must terminate the SCSI cable even if no devices
are connected. Either place a terminator here or remove
the SCSI cable from the motherboard. This holds true for
each unused SCSI cable.
are connected. Either place a terminator here or remove
the SCSI cable from the motherboard. This holds true for
each unused SCSI cable.