ASUS kn97x Manuel D’Utilisation
22
ASUS KN97-X User’s Manual
III. INSTALLATION
(CPU)
III. INST
ALLA
TION
3. Central Processing Unit (CPU)
This motherboard provides a Single Edge Contact (SEC) slot for a Pentium II pro-
cessor packaged in an SEC cartridge. The SEC slot is not compatible with other
non-Pentium II processors.
cessor packaged in an SEC cartridge. The SEC slot is not compatible with other
non-Pentium II processors.
Before your begin:
Find a system cabinet with either the power supply fan or a secondary fan circulating
air across the SEC cartridge’s passive heat sink.
Find a system cabinet with either the power supply fan or a secondary fan circulating
air across the SEC cartridge’s passive heat sink.
WARNING: Without sufficient air circulation, the SEC cartridge may over-
heat and cause damage to both the SEC cartridge and the motherboard.
heat and cause damage to both the SEC cartridge and the motherboard.
You should check to see that you have the following 9 items. (NOTE: The pictures
in the following pages will have the same item numbers next to them for your refer-
ence. The design and color of your items may be slightly different.)
in the following pages will have the same item numbers next to them for your refer-
ence. The design and color of your items may be slightly different.)
Attach Mount Bridges (Items 1,2)
(Factory Installed)
(Factory Installed)
(1)
(2)
Pentium II Retention Mechanism (Item 3)
Lock Holes
Captive Nut
(3)
Pentium II Processor Heatsink (Item 8)
(8)
Heatsink bottom Groove
for the Support Top Bar
for the Support Top Bar
Larger Fin should
be on the bottom.
be on the bottom.
Heatsink Support Base/Top Bar (Items 4-7)
Top Bar (4)
Base (7)
(Factory Installed)
(Factory Installed)
Posts
Pin
(5)
(6)
Intel Pentium II Processor in an SEC Cartridge (Item 9)