ASUS m4n68t v2 Manuel D’Utilisation

2-20

Chapter 2: BIOS information

The Tools menu items allow you to configure options for special functions. Select an item 

then press <Enter> to display the sub-menu.

Select this item to set or change the user password. The User Password item on top of the 

screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a User Password:
1. 

Select the Change User Password item and press <Enter>.

2. 

On the password box, key in a password containing up to six letters, or numbers, or 

both, then press <Enter>.

3. 

Confirm the password when prompted. 

The message “Password Installed” appears after you set your password successfully. 

To change the user password, follow the same steps as in setting a user password.

Select this item to clear the user password.

When set to [Setup], BIOS checks for user password when accessing the Setup utility. When 

set to [Always], BIOS checks for user password both when accessing Setup and booting the 

system. Configuration options: [Setup] [Always]

Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message 

appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to 

confirm your choice. See section 2.1.2 for details.